Get ready to work........... There are two Phillips screws set on either side of all the sockets for the tail/brake lights, and back up lights. These are all stuck, believe me. The ONLY way to access these and get them out is to remove the rear bumper of the car. Remove the plastic fillers between the body and the top of the rear bumper and unplug the harness that leads to the lights.There are two nuts inside the trunk, one on either side of the car at the top of the rear fender, and four bolts that hold the bumper to the frame. Get help to hold it as it comes down. Replace EVERY bulb while you have it down, you don't want to do this often !!!!
How do you replace brake lights
you need to replace the brake light button under the brakes inside the car
To replace the brake lights in the brake bar of a 2006 Cadillac DTS, first, open the trunk and remove the access panel or cover on the side of the brake light assembly. Next, twist the bulb socket counterclockwise to remove it, then take out the old bulb and replace it with a new one. Reinsert the socket back into the assembly, ensuring it locks into place, and finally, replace the access panel. Test the brake lights to confirm they are functioning properly.
If the rear lights on your 1993 Cadillac Fleetwood are staying on, it could be due to a faulty switch, such as a malfunctioning brake light switch or a problem with the taillight relay. Additionally, a stuck or misaligned door switch might keep the lights activated. Checking these components and ensuring that all doors and the trunk are properly closed can help resolve the issue. If the problem persists, consulting a professional mechanic is advisable for a thorough diagnosis.
A 1993 Cadillac Fleetwood typically uses a variety of bulb sizes depending on the specific application. For the headlights, you would generally need H6054 bulbs. For interior lights, you might use 194 bulbs, while the brake lights often require 1157 bulbs. It's always best to consult the owner's manual or check the existing bulbs for precise specifications.
It releases automatically when you shift out of park. If you have to do it manually under the parking brake is a silver handle that releases it.
Bad brake light switch
the turn signal switch is probably bad
Brake switch needs replaced.
replace fuse
yes, it lights up only when brake is applied
you probally need to replace the bulbs