0
Instrument Cluster Removal & Installation 1. Disconnect the negative battery cable. 2. Remove the cluster opening trim panel. 3. On vehicles equipped with an automatic transmission, remove the loop on the indicator cable assembly from the retainer pin. Remove the thumbwheel bracket screw from the cable bracket and slide the bracket out of the slot in the steering column tube. 4. Remove the instrumental cluster retaining bolts. 5. Pull the instrumental cluster out of the instrument panel. 6. Detach the electrical connectors. 7. Remove the instrument cluster. To install; 8. The installation is the reverse of the removal. 9. Connect the battery cable, and check the operation of all gauges, lights and signals. *** Turn the light bulb housing counter clock wise. Sometimes they are very hard to turn. Don't be afraid to turn them. ***
What else can I help you with?
How do you replace tail lights and blinkers in a 1997 Chevy?
Drop the tailgate, access the screws to remove the taillight assembly. Remove the screws holding the circuit board to the assembly, pull the board and you will have access to the bulbs.
How do you fix the brake lights on a 1997 ford expedition?
Fuse, brake switch, bulbs. Replace whatever the problem is. There is no way to know without being hands on. Bulbs most likely answer.
What fuse number controls the running board lights on a 1997 Ford Expedition XLT?
Check your owners manual. If you don't have one copy & paste this link. http://www.genuineservice.com/genuineservice/en/gloveboxresults
How do you replace an air conditoner filter on a 1997 Ford Expedition?
If you mean "cabin air filter," there is not one on the 1997 Ford Expedition. I have a '97 Expedition Eddie Baur and have looked and researched thoroughly.
How do you replace the rear axle studs on a 1997 ford expedition?
take the axle out
How do you fix a 1997 ford expedition fuel filter?
You don't fix it, you just replace it.
Can you take a catalytic conerter out of a 1997 ford expedition?
Only to replace it with a new one
How do you replace the bulb for the check engine light on a 1997 ford expedition?
Very carefully
The dash lights are out and the fuses are all good so what could be wrong on a 1997 Ford Expedition?
You might want to check or replace your dash dimmer light switch. I found this to cause either no dash lights or intermittent lights. Check the fuse box under the hood. The fuse you need is under the hood.
How do you replace the pcv hose on a 1997 ford expedition Eddie Bauer?
Take it to a licensed mechanic.
How do you replace corner lights on 1997 Toyota Corolla?
how do you replace 1999 Toyota corolla corner light - passenger side
How do you put a starter relay on a 1997 ford expedition?
The starter relay is inside the starter. You will need to replace the starter.
