Drop the tailgate, access the screws to remove the taillight assembly. Remove the screws holding the circuit board to the assembly, pull the board and you will have access to the bulbs.
remove the two screws from the lens, open the tailgate and remove two more screws, twist the plug from the back side of the lens to expose the light, twist and pull out the bulb
u need to replace with a turnsignal light switch . there is a short in steering column
how to replace a heater core in a 1997 Chevy blazer
Dead battery or dirty/corroded terminals
My rear window brake light works, but not my tail light brakes on my 1997 Monte Carlo. What is the problem?
Possibly a defective Flasher Relay. Replace the relay.
Check/replace turn signal flasher
The blinker is on a separate fuse from the hazard lights. You probably need a fuse just for your directionals. It is located right next to the fuse for the hazards.
The bulbs are burnt out.
Yes
with wires
how to clean evaporator on 1997 chevy 1500