answersLogoWhite

0

Start with the retaining screws at the very bottom of the dash (around the hood release area), then work your way up. It can be tedious, so take your time.

User Avatar

Wiki User

19y ago

What else can I help you with?

Related Questions

How do you replace the dash lights in a 1997 mercury villager?

The instrument cluster needs to be removed to get at the bulbs.


How do you replace dash lights on Ford f 150?

where are the dash bolts located to replace burnt dash lights


How do you replace the dash lights on a 2004 Nissan Quest van?

How do you replace the dash lights on a 2004 Nissan Quest


How do you replace dash lights on 99 Honda accord?

replacing dash board lights


The dash lights are out and the fuses are all good so what could be wrong on a 1997 Ford Expedition?

You might want to check or replace your dash dimmer light switch. I found this to cause either no dash lights or intermittent lights. Check the fuse box under the hood. The fuse you need is under the hood.


No dash lights no tail lights you do have brake lights 1999 Corvette?

replace fuse


Why do the dash warning lights come on at idle on a 1997 Isuzu Rodeo?

Which lights?


How do you replace dash lights on a Mazda B 3000?

To replace dash lights on a Mazda B 3000 first disconnect the battery and remove the dashboard. Unplug the cluster wiring and carefully remove the display. Replace the lights.


How do you replace panel lights on a Toyota sequoia?

How do I replace the dash panel lights on a 2001 toyota sequoia?


Why don't my tail lights and dash lights work on my 1997 Grand Cherokee?

Check your fuse. Usually the manufacturer has the dash lights and the tail lights on the same circuit.


How do you replace the dash lights on a 1997 Volvo 850?

To replace the dash lights on a 1997 Volvo 850, start by removing the instrument cluster from the dashboard. Use a flathead screwdriver to gently pry off the trim surrounding the cluster, then unscrew the cluster mounting screws. Once the cluster is out, twist the bulb sockets counterclockwise to remove them, replace the burnt bulbs with new ones, and reassemble the cluster in reverse order. Be sure to test the lights before fully reassembling the dashboard.


How do you replace dash lights on a vectra?

remove the dashboard, and u will see the lights behind it