Door Latch 1. Disconnect the negative battery cable. 2. Remove the lift gate trim panel. 3. On navigator, remove the license plate bracket. 4. Remove the lift gate latch screws. 5. Separate the lift gate latch from the lift gate. 6. Detach the door open warning lamp electrical connector *** Warning*** 7. Disconnect the lift gate latch control cable. 8. Remove the lift gate latch. 9. The installation is the reverse of the removal. > If necessary, use Multi-Purpose Grease Spray F5AZ-19G209-AA or equivalent meeting Ford Specification ESR-M1C159-A to lubricate the latch.
To replace the driver's side door latch cable on a 2001 Toyota Sequoia, start by removing the interior door panel by unscrewing the fasteners and gently prying it off. Disconnect the old latch cable from the door latch mechanism and the inside handle. Install the new cable by attaching it to the latch and the handle, then reassemble the door panel, ensuring everything is secured properly. Finally, test the door operation to ensure the new cable is functioning correctly.
To replace the fuel door cable on a 2005 Toyota Avalon, first, remove the interior panel of the driver's side door to access the cable mechanism. Disconnect the old cable from the fuel door release lever and the fuel door latch. Install the new cable by connecting it to the lever and latch before reassembling the door panel. Finally, test the new cable to ensure the fuel door opens smoothly.
Need more info. Exactly what front door cable are you referring too...
To replace the automatic sliding door cable on a 2000 Pontiac Montana, start by removing the interior door panel to access the door mechanism. Disconnect the old cable from the motor and the door latch, then remove any brackets or clips securing it. Install the new cable by attaching it to the motor and latch, ensuring it's properly threaded through the guide channels. Finally, reassemble the door panel and test the door's operation to ensure everything is functioning correctly.
What is a door latch mhahahaha lol Joking! Answer: Replace it with duct tape
Replace the door latch.
To replace the sliding door cable on a Pontiac Montana van, first, remove the interior panel of the sliding door by unscrewing any fasteners and carefully prying it off. Next, detach the old cable from the pulley and the door latch mechanism. Install the new cable by threading it through the pulley and attaching it to the latch, ensuring it is properly aligned. Finally, reassemble the interior panel and test the door operation to ensure everything is functioning correctly.
To replace a sliding glass door latch, first remove the old latch by unscrewing it from the door. Then, align the new latch with the existing holes and screw it into place. Test the latch to ensure it functions properly.
To find a longer door latch to replace the existing one on your door, you can measure the length of the current latch and search for a replacement latch that is longer in hardware stores or online. Make sure to choose a latch that is compatible with your door's lock mechanism.
on the end of each door , visible with the door open
The cable end fittings are plastic and poorly designed. You will have to get new ones from the dealer and replace them or it. I had to replace all of them on my 1994 E-150.
= How do you replace the rear dutch door latch on a 1997 gmc safari?" =