How do you replace drivers side mirror on 2000 dodge stratus?

Answer 1

I assume that it is a power mirror. The first thing you'll need to do is disconect the negative cable on the battery. Once you've done this, you'll have to remove the door panel. a few of the screws that hold this on are a little tricky to find. there is one behind the door release handle, one down in the arm rest (these are under plastic covers that can be popped up with a small screwdriver). The tricky ones are behind the metal grill where the speaker is. this metal grill will come out by prying it out with a flathead screwdriver. there should be 2 or three screws behind it that also hold the door panel on. It's been a year since I've done this so I'm not sure on the exact amount of screws behind this grill. Don't confuse the screws that hold a speaker in. the rest of the panel should only be held in with pop off clips. once you have the panel off, at the top, where the mirror is, there is another small trim plat held on with a few screws. once you have the panel off there are 3 screws (8mm) that hold the mirror on. once you have the screws out then the unit should come off. Don't forget to unplug the wires to the mirror if it is a power mirror. I'm almost positive that all 2000 models came with power mirrors. Hope this helps

Tim B