There is a staple on the front of the gearshift just below the knob, remove it and lift the shift knob.
how to remove gear shift knob on bmw318
It is glued on you have to replace the entire stick shift
twist the old knob off and follow the diractions on the new shifter knob
pull the boot down then theres a little U shaped key near the bottom of the shift knob pull it out then slide shift knob off
To replace the gear shift knob in a 2003 Hyundai Accent, first, ensure the vehicle is in park and the ignition is off. Carefully twist the existing knob counterclockwise to remove it from the shift lever. Align the new shift knob with the lever and twist it clockwise until it is securely in place. Finally, check that the knob is firmly attached and functions correctly before driving.
Unscrew it.
To replace the shift knob in a 2000 Volvo S70, first, ensure the car is in the "Park" position. Gently pull the old shift knob upwards to release it from the lever; it may require some force. Once removed, slide the new shift knob onto the lever until it clicks into place. Finally, test the knob to ensure it is securely attached before driving.
To remove the shift knob on the 1999 Olds Intrigue look for the pin that is holding the knob in place. Remove the pin and pull up on the knob, replace kob and pin.
To replace a PT Cruiser shift knob, you'll typically need a flathead screwdriver and possibly a socket wrench, depending on the type of knob. First, gently pry off the plastic cover surrounding the shift knob if applicable. Then, unscrew or pull off the old knob, and attach the new one by reversing the removal process. Always ensure the vehicle is in park and the ignition is off before starting the replacement.
Check
To change the gear shift light in a 2006 Toyota Matrix, first disconnect the negative terminal of the battery for safety. Remove the gear shift knob by unscrewing or pulling it off, depending on the design. Then, carefully pry off the center console cover to access the light bulb socket. Replace the old bulb with a new one, reassemble the console and knob, and reconnect the battery.