0
You have to remove the splash guard inside the wheel well to access the lamp 1. Turn the wheel to the outside to access the two screws towards the front of the wheel well. 2. You then need to remove two plastic plugs connecting the wheel well splash guard to a "body side" splash guard. Note that there are two screws that connect the splash guard to the bumper. These screws are accessible from the bottom of the bumper. You may want to jack up the vehicle to gain access to these screws. 3. Now note that I didn't remove the entire wheel well splash guard. By removing the screws at the front I was able to push the guard aside to access the bulb. 4. It was difficult to remove the wire harness cable from the bulb. The plastic clip that secures it in place is much like the one on the headlamp and it is located (at least mine was) towards the bottom of the vehicle. You have to release this plastic clip to disconnect the wire harness. 5. Disconnect the harness 6. Then I had to use a needle nose pliers to rotate the lamp counterclockwise to remove it from the socket. 7. Using the needle nose pliers I then inserted the new lamp, turning clockwise to secure it in place 8. Connect the wire harness 9. Re-connect the splash guard Good luck.
What else can I help you with?
How do you replace map lamp bulb in 2004 Lincoln town car?
how do i change the bulb in the clock on 2004 lincoln town car
How do you replace the fog lamp bulb in a 2004 Mazda rx8?
To replace the fog lamp bulb in a 2004 Mazda RX-8, start by turning off the vehicle and removing the key from the ignition. Access the fog lamp assembly by turning the fog lamp cover counterclockwise to remove it. Carefully disconnect the old bulb from the socket and replace it with a new bulb, ensuring not to touch the glass with your fingers. Finally, reassemble the fog lamp cover by turning it clockwise to secure it back in place.
How do you replace a 2004 Endeavor headlight?
Open the hood, twist/unscrew the grey colored lamp holder and replace the bulb.
How do you replace the clock lamp on a Lincoln Cartier Town Car?
how to replace lincoln town car 2004 ultimate clock bulb
How do you replace front turn signal bulb 2004 range rover?
how do you take out the front signal lamp on a 2004 range rover
How do replace tail lamp bulb 2005 Xterra?
how to replace tail lamp 2005 xterra
How do you replace the fog lamp bulb on Kia Sedona 2007?
How do you replace the fog lamp bulb on Kia Sedona 2007?Read more: How_do_you_replace_the_fog_lamp_bulb_on_Kia_Sedona_2007
How do you replace the bulb in my tizio desk lamp?
To replace the bulb in a Tizio desk lamp, first, unplug the lamp for safety. Gently grasp the bulb and twist it counterclockwise to remove it from the socket. Insert the new bulb by twisting it clockwise until secure, then plug the lamp back in to test. Make sure to use a compatible bulb type as specified in the lamp's instructions.
How do you replace bulb on Renault Scenic Spot lamp and what bulb is it?
Do it the normal way with a florescent bulb
What is the best way to replace a small screw bulb in a lamp?
To replace a small screw bulb in a lamp, first unplug the lamp for safety. Allow the bulb to cool if it was recently on. Carefully unscrew the old bulb by turning it counterclockwise. Insert the new bulb by turning it clockwise until it is securely in place. Plug the lamp back in and test the new bulb to ensure it is working properly.
How do you replace parking lamp bulb 1996 Ford Taurus?
how do I replace a parking lamp (left) on a 1996 Ford Taurus
How do you replace a door lamp bulb on a 1998 Silverado Z71?
Get a flat head screwdriver and pop it off...then replace the bulb
