0
What else can I help you with?
How do you replace front brake pads on a 1992 Pontiac Transport?
With a wrench.
Will a front end assembly without concealed headlamps for a 1992 Pontiac Sun bird LE replace the front end with concealed headlamps on a 1992 Pontiac Sunbird GT?
yes it can but you need to change te harness, do you have the concealed headlamps for sale or something?
Where are the back spark plugs on a 1997 Pontiac transport and how do you change them?
take the two bolts out of the front engine mounts ant pull the engine forward to replace
Replace a front hub assembly in a 2004 aztek?
To replace the front hub assembly in a 2004 Pontiac Aztek, first, safely lift the vehicle and remove the front wheel. Then, disconnect the brake caliper and rotor to access the hub assembly. Remove the hub assembly by unbolting it from the steering knuckle and disconnecting any associated wiring. Finally, install the new hub assembly, reassemble the brake components, and ensure everything is securely fastened before lowering the vehicle.
How do you replace front fender 98 Pontiac Bonneville?
How do you replace passenger side fender on a 1998 pontiac bonneville se
How do you replace front wheel bearings on a 2004 Pontiac Grand Prix?
You can't replace just the wheel bearings. You have to replace the whole hub assembly. Costs about 200 bucks per wheel at a repair shop. I have had both of mine replaced.
How do you replace front wheel bearings on a 2005 Pontiac grand prix?
To replace the front wheel bearings on a 2005 Pontiac Grand Prix, first, lift the vehicle and remove the front wheel. Next, detach the brake caliper and rotor to access the hub assembly. Remove the hub assembly by unfastening the bolts and disconnecting any associated sensors. Finally, install the new wheel bearing hub, reassemble the components in reverse order, and ensure everything is tightened to the manufacturer's specifications.
Where is the horn located on a Pontiac transport?
The horn on a Pontiac Transport is located in the engine compartment on the passenger side of the vehicle. It should be right behind the passenger side front headlight.
How do you replace front door latch on a 92 Pontiac transport?
To replace the front door latch on a 1992 Pontiac Transport, first, remove the interior door panel by unscrewing any screws and gently prying off clips. Once the panel is off, disconnect the wiring harnesses and remove the bolts securing the latch to the door. Replace the old latch with the new one, reattach the bolts, reconnect the wiring, and finally, reassemble the door panel. Test the latch to ensure it functions correctly before finishing up.
How can you open your hood on your 95 Pontiac transport if the cable is broken?
Reach under the front of your car between the radiator and the grill and pull the wire down. That will unhook your hood latch. Replace the cable.
How do you replace front wheel bearing assembly on dodge stratus?
The front bearing for a Dodge Stratus is attached to the Hub. To replace it remove all the components on the hub assembly. There are three bolts that hold the assembly in place. Loosen the bolts and pry out the hub. Replace the unit.
How do you replace the coil springs on a Pontiac grand am 2000?
change front coil spring on 2000 Pontiac grand am
