answersLogoWhite

0

# Relieve the sytsem fuel pressure # Disconnect the negative battery cable # Disconnect the vacuum hose from the fuel pressure regulator # Disconnect the main injector harness electrical connector and the injector connectors.Detach the wiring harness retainers from the fuel rail and set the harness aside.Apply a numbered tag to each connector with the number of the cylinder # Remove the two bolts that attach the fuel pressure line flange to the fuel rail and disconnect the pressure line from the fuel rail # Loosen the hose clamp and disconnect the fuel return hose from the fuel return line # Clean and debris from around the injectors.Remove the fuel rail mounting bolts.Gently rock the fuel rail and injectors to loosen.Remove the fuel rail and fuel injectors as an assembly.Remove the fuel rail insulators.Inspect the insulators for cracks.If the insulators are cracked replace them # Remove the retaining clip and remove the injectors from the fuel rail assembly # Remove and discard all the old o-rings and seals and replace with new ones

User Avatar

Wiki User

16y ago

What else can I help you with?