To replace the fuel pump on a 1992 Dodge Dakota, first, relieve the fuel system pressure by removing the fuel pump relay and starting the engine until it stalls. Next, disconnect the battery and drain the fuel tank. Remove the tank from the vehicle by unbolting it and disconnecting the fuel lines and electrical connections. Finally, replace the old fuel pump with a new one, reassemble the tank, and reconnect the battery and fuel relay.
1992 Dodge Dakota Fuel Relay location?
It is in the fuel tank.
40psi40psi
i have a 1992 dodge Dakota 4x4 and a 1989 Dakota 4x4 and the fuel pump is inside the fuel tank. both trucks have the 3.9 v6 engines.
You don't, you replace it if restricted.You don't, you replace it if restricted.
i have a 1999 Dakota 3.9 and fuel regulator is on top of the fuel pump on the fuel tank... i have a 1999 Dakota 3.9 and fuel regulator is on top of the fuel pump on the fuel tank...
Drop the fuel tank, (thats where its located). pull the pump out of the tank and replace with the new one.
You can`t. You must replace sender or guage.
Dodge does not use inertia/reset switches.
On Dodge Dakota it is integral to the fuel pump module and located inside the fuel tank. The filter itself is not serviceable or replaceable. To replace the filter, you must replace the entire fuel pump.
It is integrated with the fuel pressure regulator. The fuel tank must be removed to replace it.
fuel tank has to come down it's inside.