answersLogoWhite

0

To replace the hazard switch on a 2003 Oldsmobile Alero, first disconnect the negative battery cable to ensure safety. Then, carefully remove the trim panel around the switch, using a flathead screwdriver if necessary. After that, disconnect the wiring harness from the old hazard switch, remove the switch from the panel, and install the new switch by reversing the steps. Finally, reattach the trim panel and reconnect the battery to test the new switch.

User Avatar

AnswerBot

2mo ago

What else can I help you with?

Related Questions

How do you replace hazard switch 2001 Oldsmobile alero?

How do you replace the hazard switch


How do you fix a constant turn singnal clicking sound in dash of 99 alero?

replace hazard switch


Where would you locate a neutral safety switch on a 2001 oldmobile alero?

It's located on the transmission.


Why do the blinkers on my 2000 alero stop working with my hazards?

The turn signals are controlled through the hazard warning switch. I have an 01 Alero and had the same problem. I had to replace the hazard warning switch. The dealer wanted like $90 for the switch, or you can try a salvage yard, which I did and payed $10. Hope this hepls.


Blinker clicking on o4 alero?

Hi, Is your blinker actually flashing on and off? If not it may be your hazard switch. I had to replace mine.


How do you replace the turn signal and hazard flasher on a 2000 Oldsmobile alero?

the hazardlight switch is where the blinkers flash,take the vent out under the hazards switch then reach up in there behind the haz. switch


Where is the flasher relay for a 2002 alero?

it is in the hazard switch. take middle vent out and you can get to it


How do you replace the turn signal flasher hazard flasher switch on a 2002 Oldsmobile alero?

To replace the turn signal and hazard flasher switch on a 2002 Oldsmobile Alero, begin by disconnecting the negative battery cable to ensure safety. Remove the steering column cover by unscrewing the screws and gently prying it apart. Locate the flasher relay, which is usually situated near the steering column, and carefully unplug it. Replace it with the new flasher switch, reassemble the steering column cover, and reconnect the battery.


What is the bolt pattern on a 1999 alero oldmobile?

5 bolt 115mm


How do you change the hazard switch on a 2001 olds alero?

it is on recall---see recall list via web---dealer will do it for you


Where is the hazard flasher located on a 2000 Oldsmobile alero?

It is located under the dash behind the hazard button. The switch was recalled by GM on certain 2000 Aleros. Here is a link that gives in depth instructions with illustrations on removal and replacement of the switch. The instructions for the Alero start on page 4. The link http://www.gaownersclub.com/kbruce/misc/Flashers_04098_Dec_16_2004.pdf Hope this helps.


How do you fix a signal light that comes on sometimes and sometimes doesn't come on in a 2000 olds alero?

replace your hazard flasher. I have the same problem