Disconnect battery. Check you have radio code beforehand. You must remove steering column cowls and switch stalk assy before removing instrument panel. Prise out and unplug clock, push out bank of switches and unplug. Remove triangle screw cover from LH side of centre vents, remove screw. Remove two screws from top of inst panel then gently pull off the complete surround. As the bottom part of this is fastened with spring clips on RH side gently prise out with round end of say a nail file. Unplug stalk unit connectors then centre screw,remove stalk unit. Remove four screws holding inst panel,pull unit forward to reveal multy connector. Push end of small screwdriver under retaining clip,fold back to enable removal. Remove inst panel forward then to the left. There are three filament lamps in unit, two at top,one below. Twist to remove. After changing lamps,replace parts in reverse order. Check stalk unit is correctly seated before replacing screw. Test the self cancelling works before replacing cowls. A magnetic probe is useful to prevent losing screws. Reconnect battery.
The instrument cluster needs to be removed to get at the bulbs.
Used for Interior Lights and Instrument Panel Lights.
I have the same problem with my 1999. The tail lights as well as the interior instrument panel and the license plate lights are all not working.
where can i find the temperture sensor on a ford fiesta 1997
Replace the instrument cluster.
how do you replace 1999 Toyota corolla corner light - passenger side
Begin by removing the instrument panel cover in your 1997 Acura. Remove the lightbulb, by pushing it in and turning at the same time. Install the new lightbulb in the same manner that you removed it.
The dashboard lights on a 1997 Eagle Talon can be changed by reaching up into the dash to get to the bulbs. Another way is to remove the dashboard screws and remove the front of the instrument panel.
Show me how to replace the head light on a 1997 Nissan Maxima?
A blown fuse. Or a connection problem within the instrument cluster
To replace the spoiler LED lights on a 1997 Nissan Maxima, first, remove the screws or bolts securing the spoiler to the trunk, then gently lift it off. Disconnect the wiring harness connected to the LED lights. Replace the old LED lights with new ones by connecting the wiring harness and securing the spoiler back in place with the screws or bolts. Finally, test the lights to ensure they are functioning properly.
To replace the alternator on a 1997 Ford Fiesta Zetec MK5, first disconnect the negative battery terminal to ensure safety. Remove the drive belt by loosening the tensioner, then detach the electrical connections from the alternator. Unscrew the mounting bolts to remove the old alternator, and install the new one by reversing the process. Finally, reattach the drive belt, reconnect the battery, and check the alternator's operation.