answersLogoWhite

0

What else can I help you with?

Related Questions

1977 f150 4x4s were not made with 302 engines in them Do you need custom motor mounts if you want to put this engine in the truck?

I am not a Ford man but motor mounts for a 351W engine may be what you want.


How do you replace motor mounts on a 93 ford bronco?

To replace the motor mounts on a 1993 Ford Bronco, first, safely lift and support the vehicle. Disconnect the battery, then remove any components obstructing access to the motor mounts, such as the air intake or exhaust. Use a jack to support the engine and carefully unbolt the old mounts from the engine and frame. Replace them with new mounts, ensuring they are properly aligned, and then reassemble everything in the reverse order.


How do you replace freeze plugs between the motor and transmission on a 1997 Ford Taurus?

how do you replace the freeze plugs between the transmision and motor on a 1997 f150 5.4


Where are the motor mounts and transmission mounts on a 1997 Ford Taurus gl And how can i tell if they are worn out or bad?

The 1997 Ford Taurus has for motor mounts and to transmission mounts. Worn motor mounts and transmission mounts will allow the engine and transmission to have movement.


How do you replace the oil pan on the 1988 Ford E-150?

Remove motor mounts and raise motor approximately 4 inches.


How do you change motor mounts on 1997 ford ranger?

Carefully place a jack with a block of wood under the motor, loosen mounts from motor, jack motor up just enough to remove old mounts, replace mounts, lower motor onto new mounts, tighten motor to mounts. Make sure there aren't any hoses, wires, lines, etc. that may tear while lifting the motor.


How do you change motor mounts on ford ranger?

Carefully place a jack with a block of wood under the motor, loosen mounts from motor, jack motor up just enough to remove old mounts, replace mounts, lower motor onto new mounts, tighten motor to mounts. Make sure there aren't any hoses, wires, lines, etc. that may tear while lifting the motor.


How do you replace an oil pump on a 1988 Ford F150?

You will need to unbolt the motor and transmission from their mounts. jack up the motor, drain and remove the lower oil pan. That should give you access to the pump. If your going to do it you might want to change your main barrings at the same time.


Can you put a 350 gm motor in your 97 ford f150 is there a kit?

Can you put a 350 gm motor in 97 ford f150


2000 ford escort zx2 location of motor mounts?

directions to change the motor mounts?


Have a 05 Ford f150 will a 350 Ford motor fit in it?

Ford never made a 350 motor


How do you change the battery on a 2001 Ford F150?

How do you remove and replace the battery on a 2001 Ford F150?