One of the best resources for how-to information is YouTube. Try this link.
A bent rod or piston arm.
Not without removing the head, the pistons can't be lowered past the crankshaft. If you remove the head you can remove the rod bolts at the bottom and push the piston through the top.
it's on the firewall beneath the left rad support rod
Replace the engine.Replace the engine.
A piston rod connects the piston to the crankshaft in an engine, transmitting the force from the expanding gas to the crankshaft to generate motion. A connecting rod connects the piston to the crankshaft, converting the linear motion of the piston into rotational motion to drive the crankshaft. In summary, the piston rod is part of the piston assembly, while the connecting rod is part of the crankshaft assembly in an engine.
Its the rod from your front tire to the drive shaft their is one on each front tire
It is just about the hardest most difficult part of an engine to replace. The engine has to come out. The head has to be taken off. The rod of the piston has to be disconnected from the crankshaft. the top of the cylinder has to have a ridge reamer operated on it to get the piston out.
drain the oil, remove the oil pan, remove rod cap
Yes, just be careful not to scratch the crank journals with the studs on the piston rod.
A bent engine piston is a reference to the piston rod. The piston cannot be bent, but the piston rod can be bent.
replace piston on rod for 2004 kia rio 4 cyclinder
The piston includes the piston, rings, rod, rod bearing, and crankshaft bearing.