answersLogoWhite

0

To replace the rear rotors on a 2000 Ford Excursion, start by safely lifting the vehicle and removing the rear wheels. Next, take off the brake caliper by unbolting it and hang it to avoid stressing the brake line. Remove the old rotor; if it's stuck, gently tap it with a hammer. Install the new rotor, reattach the caliper, and ensure everything is tight before putting the wheels back on and lowering the vehicle.

User Avatar

AnswerBot

5mo ago

What else can I help you with?

Related Questions

Fuel capacity of 2000 ford excursion?

For a 2000 Ford Excursion : ( 166.6 litres / 44.0 U.S. gallons )


What year did ford start producing the excursion?

( The 2000 ) was the first model year of the Ford Excursion


Is your 2000 ford excursion r-12 or r-134a?

A 2000 Ford Excursion would be ( 134a ) in the air conditioning system


How do you Replace the Headlights on a 2000 Ford excursion?

twist the black tube (where the wires come out) it will click, remove the bulb holder , replace bulb refit


What is the minimum brake rotor thickness for a 2003 Ford Excursion?

Got these from ford last night for an 03 7.3L 2WD DISCARD at: Front rotors 1.417 Rear rotors 1.010


Where is the factory reset code for 2000 ford excursion keyless entry?

I just bought a 2000 ford excursion,where would i look for the factory entry code?


What is the sensor behind the front rotors on a 2001 ford excursion 2 wheel drive?

abs sensor


What was the first year for the ford excursion?

The Excursion was introduced in 1999 as a 2000 model-year vehicle.


What size are the factory speaker in a 2000 ford excursion?

6x8


What type of battery is needed for Ford Excursion 2000?

Motorcraft ( BXT - 65 - 750 ) is Fords " top of the line " battery for your 2000 Ford Excursion ( 2 batteries are required if you have a diesel engine )


How do you replace an alternator on a 2000 Ford Excursion?

To replace the alternator on a 2000 Ford Excursion, first disconnect the negative battery cable to ensure safety. Remove the serpentine belt by loosening the tensioner, then unbolt the alternator from its mounting bracket. Disconnect the electrical connectors and remove the alternator from the engine bay. Install the new alternator by reversing the steps, ensuring all connections are secure before reconnecting the battery.


How to replace front brake rotors on a 2000 ford explorer sport 4x4?

How to Install Front Brake Pads Check Related links below.

Trending Questions
How do you change wiper linkage bushings in a 1991 dodge Dakota? How many kilometers are in 9000 meters? What is the base engine size of the 2003 Cadillac CTS? How many Dodge Vipers are available? What is the firing order for a 19 67 Lincoln Continental? 1997 Buick park avenue tail lights and dash lights dont work but all others work fuses are good? How do you hook up the accessory wire when installing an after market CD player in a 2000 Pontiac Montana? How does the fifth wheel release work on 2007 Freightliner Columbia? 98 Buick Riviera 3.8 supercharged twice it has shut down as I started out from a stop when I tried to restart it just spun but didn't start turned off ignition it started? How do you replace an AC compressor in a 1999 Kia Sephia? How do you flush the radiator on 2000 Chevy Malibu? What part is needed to repair the drivers side power window in 1994 Camry when it will go down fine sometimes? What can cause oil to be in the intake manifold plenum cover on a 1999-2003 Ford Windstar? What is the socket wrench size for RJ19LM? How much oil for a C3500 turbo diesel? What causes a 2003 Ford Focus to stall when stopping only on humid days with the temperature around 75 degrees after the car has been used for stop-and-go driving or running errands? Can a 1995 Chevy Blazer fuel pump work on 1999 Chevy Blazer? On a 1987 Plymouth Voyager why would the windshield wipers not work? Where is the ac low pressure switch located on a 97 buick century? What type of oil filter goes on a Ford Taurus 2001 3.0l v6 engine?