To replace the rear wheel bearings on a 2004 Mitsubishi L200, first, raise the vehicle and remove the rear wheels. Next, detach the brake components, including the caliper and rotor, and then remove the axle nut and hub assembly. Carefully press out the old bearings from the hub using a bearing puller, and install the new bearings using a press. Finally, reassemble the hub, brake components, and wheels, making sure everything is properly torqued.
Do I need any special tools to replace front wheel bearings on a Saturn 2002 L200?Also what is the procedure for doing so?
To replace the gearbox bearings on a Mitsubishi L200, first, ensure the vehicle is safely elevated and secure. Drain the gearbox oil, then remove the gearbox from the vehicle by disconnecting the necessary components like the driveshaft and linkages. Carefully disassemble the gearbox, taking note of the arrangement of parts, and replace the worn bearings with new ones. Reassemble the gearbox, refill with the appropriate oil, and reinstall it in the vehicle, ensuring all connections are secure.
They very rarely need replacing, just adjusting
2001saturn l200 how to replace a windshield wiper switch
How do I put the back seat bottom back in my 2002 Saturn L200? The Mechanic took it out and did not replace it. How do I put the back seat bottom back in my 2002 Saturn L200? The Mechanic took it out and did not replace it.
Under passenger headlight. Pretty close to the wheel well.
It can cost from $16 to $50 to replace the brakes on a 2001 Saturn L200. This price may change based on part brand and any labor costs at a shop.
I am looking for the same on a 2007 model.
how to replace rear struts on a 2002 saturn L 300
Theuy are bolted on from the inside of the door.
Dexron 3 2 quarts
Visually inspect the belt. Look at the grooved side, not the smooth side. If there are cracks or dropped out sections on the grooved side, replace the belt. If the grooves look worn, replace the belt. When replacing the belt, inspect the grooves on the pulleys and clean them if they have become packed with dirt or worn rubber. That's also a good time to check the idler pulleys and other bearings. If they make noise when you spin them, you should probably replace anything with bearings.