answersLogoWhite

0

The shift cable on an 01 Chevy Cavalier is replaced by removing the retaining screws, removing the cable from the shifter, and pulling it from the vehicle. A new cable can then be locked into place and bolted down.

User Avatar

Wiki User

11y ago

What else can I help you with?

Related Questions

Where is manual override to get your 01 z24 cavalier out of park located?

I don't know of a "manual override" but there is an adjustment where the shifter cable is mounted to the transmission and connected to the transmission shift lever. Disconnect it, and pull the end up so you can see it. Adjust the cable if necessary, but be sure that you first push the brake pedal to take the car out off park.


Will 05 cavalier parts fit 01 cavalier?

Depends on what your trying to swap.


When was The Cavalier Daily created?

The Cavalier Daily was created on 1890-01-15.


01 Dodge Neon manual transmission wont shift into reverse What causes this and how to fix?

It is most likely the shift cable bushings. The dealership only sells the cable assembly which is a little over $200. You can by stiffer, more durable urathane bushings for around $20 from JcWhitney. They are really easy to install.


Axle nut size 01 cavalier?

30mm


Where the timing belt on a 01 cavalier?

It doesn't have a timing belt.


When was Joseph Cable - Medal of Honor - born?

Joseph Cable - Medal of Honor - was born on 1848-01-01.


What are all the possible compatible engines that can be used to replace an engine from a 1997 Chevrolet Cavalier?

*96-98 Olds Achivea *96-01 Pontiac Grand Am *99-01 Olds Alero *96-01 Pontiac Sunfire *96-01 Chevy Malibu *96-? Buick Skylark *96-98 Olds Cutlass


Can you use headlights from a Chevy cavalier 1999 in a 2001 cavalier car?

No...the 99 has 2 bulbs and the 01 has 1 bulb


If you have a 2001 Chevy Cavalier with an engine from a 2004 which O2 sensor should you buy 2001 or 2004?

that depends which wiring do you have the 01 or the 04 if 01 then get the 01 if not get the other


How do you replace the choke cable on an 01 Honda rancher?

To replace the choke cable on a 2001 Honda Rancher, start by removing the seat and any necessary plastic covers to access the choke assembly. Disconnect the old choke cable from the carburetor and the choke lever. Install the new choke cable by threading it through the appropriate mounts and connecting it to both the carburetor and the lever. Finally, test the choke operation before reassembling the seat and covers.


When was Global Destiny Cable created?

Global Destiny Cable was created in 1995-01.