answersLogoWhite

0

You have to take off the plastic shrouds in the inside of the wheel wells. There are about 4-5 plastic "push-in" screws (or snaps) that you have to pop out, then remove the shroud, and when you look into the wheel well you will be able to see the marker lights. Pop out the bulbs and replace but be careful because often times the bulbs have shattered and you'll cut yourself. Good luck.

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

How do you Replace side marker lights on 2009 Malibu?

No


How do you replace the front marker lights on an 08 Kia Spectra?

how do change the front marker lights on my 08 kia spectra can't get at them from under the hood


How do you replace a side marker bulb on a 2008 Saturn vue?

How do you replace the side marker lights on a 2008 saturn vue?, they seem to be hid completely in the body.


How do you replace marker lights on a 2008 gmc Yukon Denali?

You can replace the marker lights on a 2008 GMC Yukon Denali by removing the retaining screws and disconnecting the wiring harness. The bulb can then be unscrewed and a new bulb put in place.


How do you change side marker light bulb on a 2001 aurora olds?

To change the side marker light bulb on a 2001 Oldsmobile Aurora, first, locate the side marker assembly on the front fender. Gently pull the assembly away from the fender; you may need to use a flathead screwdriver to pry it out if it's stuck. Once removed, twist the bulb socket counterclockwise to release it, then pull out the old bulb and replace it with a new one. Reinsert the bulb socket, twist it to secure it, and snap the side marker assembly back into place.


Where and What are Marker Lights?

Turn signal lights that double as parking (marker lights) when not blinking.


How do you replace the side marker lights on XJ8?

To replace the side marker lights on a Jaguar XJ8, first, locate the marker light assembly, which is usually found on the front fenders. Use a flathead screwdriver to gently pry off the assembly or remove any screws holding it in place. Once removed, twist the bulb socket counterclockwise to release the old bulb, then insert the new bulb and reassemble the marker light back into its housing. Finally, test the lights to ensure they are functioning properly.


How do you change acura TL 2005 side marker lights?

Don't worry about breaking it, you will have to pop it out and replace the whole light. It usually run around $25 for a pair of lights.


What are marker lights used for?

To assist drivers in maintaining road safety, marker lights are installed in road lanes and partitions, making them easily visible. Marker lights can either be LED-powered or merely reflective.


Does a 1995 Pontiac Grand Am SC have marker lights or reflectors if lights how do you change them?

The 1995 Pontiac Grand Am has reflectors on the sides that may look like side marker lights, but they are only reflectors. The tail lights and front parking lights are so positioned that they can be viewed from the sides, so separate side marker lights are unnecessary.


Lexus RX300 Side Marker Lights?

What about them?


How do you replace a side marker bulb on Chevy Trailblazer?

how do you replace side marker light on 2008 chevy trailblazer