The 1995 Pontiac Grand Am has reflectors on the sides that may look like side marker lights, but they are only reflectors. The tail lights and front parking lights are so positioned that they can be viewed from the sides, so separate side marker lights are unnecessary.
Yup - any motorized vehicle has had to have these, or side marker lights since 1968!!
Remove the two bolts that hold the whole trim assembly together. Remove the outer trim and turn signal and then the marker lights to change them.
how do change the front marker lights on my 08 kia spectra can't get at them from under the hood
To change the side marker lights on this model, remove the screws of under cover that attaches to the bumper. It would be easiest to do if the vehicle was lifted up in some way.
Turn signal lights that double as parking (marker lights) when not blinking.
Amber.
Amber
To assist drivers in maintaining road safety, marker lights are installed in road lanes and partitions, making them easily visible. Marker lights can either be LED-powered or merely reflective.
there is a clip on the back side under the fender. usually rusted so a new one will be needed when you change marker light.
Don't worry about breaking it, you will have to pop it out and replace the whole light. It usually run around $25 for a pair of lights.
On my 98 sunfire, the tail lights and marker lights only work if you turn on the headlights. If only the daytime lights are on, the Pontiac on the trunk is illuminated but no other lights at the rear until brakes or turn signals are activated. This is common with a lot of vehicles out there. Daytime running lights are not necessarily the same candle power as the headlights. I can tell a big difference in mine.
Front marker lights can be changed by removing front headlight assembly. To remove pull up on two metal clips behind light assembly and unplug wires. The side marker lights are now accessable. Turn bulb socket ccw to remove.