the best way is buy a set that are made for the truck and just pull off one at a time and route them the same way as they came off. a full set is expensive but if you have one bad it won't be long till the others need rplacing
To replace spark plug wires on a 3300 Oldsmobile engine, open the hood and remove the wires from the end of the engine. The number of spark plug wires most often corresponds to the number of cylinders your engine has.
Disconnect the battery, remove the spark plugs wires and boots and remove the spark plugs. Put in the spark plugs, replace the spark plug wires and boots, and connect the battery.
No you do not need to replace any plugs at all when replacing wires.
Wires may be old and possibly porous and spark is jumping through Replace plug wires
Removing spark plug wires is rather easy. All a person needs to do is grab the top and the bottom of the cable wires firmly and pull.
how to replace spark plugs wires 1992 buick century v 6 3300 stationwagon
Replace high tension coil wire. Probably time to replace all the spark plug wires.
Unplug all the spark plug wires. then loosen the screws holding the distributor on, remove it, put the new one on and screw it in, then replace the spark plug wires
I`M HAVING A HARD TIME REMOVING SPARK PLUG WIRES ON MY 2002 CHEVY SILVERADO 2500 6.0. ANY TIPS?
Replace spark plugs, wires, air filter, fuel filter, spark plug wires and PCV valve.
you have to replace all of your spark plug wires. there is a coil built into the top of each boot that goes over each spark plug. that's why the wires are so costly.
Disconnect the battery, remove the engine cover, remove the spark plugs wires and boots, and remove the spark plugs. Put in the new spark plugs, replace the spark plug wires and boots, replace the engine cover, and connect the battery.