0
I JUST DID THEM LAST WEEK ON A 1991 CAMARO. TAKE OFF THE INSIDE PLASTIC PANEL BY THE HOOD PULLER . JACK UP THE FRONT OF THE CAR, PLACE JACK STANDS UNDER IT. REMOVE THE FRONT TIRES. REMOVE THE PLASTIC FENDER DIRT SHEILDS. MAKE SURE YOU USE THAT JACK TO SUPPORT UNDER NEATH THE DOOR, I USED A SMALL 4X4 BLOCK BETWEEN THE JACK AND THE DOORS BOTTOM TO NOT DAMAGE THE DOOR. REMOVE THE TWO BOLTS FROM INSIDE THE PLASTIC PANEL YOU REMOVED. NOW REMOVE THE 3RD BOLT FROM THE OUTSIDE OF THE HINGE BY USING A RATCHET FROM INSIDE THE PLASTIC FENDER SHIELD AREA. USE PLIERS AND SQUEEZE THE PINS TABS IN WARDS. PULL UP AND IT SHOULD POP UP AND OUT. THE SPRING WILL ALSO FALL DOWN. PLACE THE NEW BUSHINGS IN PLACE, THEN INSERT THE NEW PIN. PUT THE BOLT FROM INSIDE THE FENDER AREA BACK 1ST. THEN THE OTHER TWO . DO NOT TIGHTEN TILL ALL THREE ARE HALF WAY STARTED. NOW TIGHTEN ALL THREE. PLACE THE PALSTIC PANELS BACK ON. SHOOT THE HINGES WITH WHITE LITHIUM GREASE. NEW PINS ARE LESS THAN 4 BUCKS EACH AT THE DEALER, BUSHINGS ARE UNDER A BUCK EACH. ALMOST ALWAYS IN STOCK. MY 1ST TIME DOING IT AND TOOK ME ONE HOUR PER DOOR.
What else can I help you with?
How do you adjust the front fender on an 1981 camaro it is rubbing on the door?
by using only the information given, your answer is to replace the lower door hinge pin and bushing.
How can I fix a door hinge?
To fix a door hinge, you can tighten the screws on the hinge or replace them if they are stripped. You can also lubricate the hinge with oil or grease to reduce friction. If the hinge is damaged, you may need to replace it with a new one.
How do you change the door hinge on a 1990 Camaro?
The '90 camaro has three bolts that hold the door hinge to the body and I believe three that hold the hinge to the door. The easiest way I've found is to score the position of the original hinge location and remove the bolts with the appropriate wrench with the door open. Be sure to have the door supported because it will try to sag. Once the new hinge is in place, align it to the original hinges location and tighten your bolts down.
Replace door hinge 1989 Mitsubishi Triton?
need to replace door hinge pin on 189 mitsibushi Triton tray back
Can you replace top door hinge with bottom hinge on 1992 ford explorer?
You can replace the top door hinge with bottom hinges on the 1992 as long as the hinge is for the cab doors. The hinges for the tailgate would not work on the doors.
How to replace door hinge pins on 2002 blazer?
http://www.bodyshopzone.com/archives/mechanical/door/hinge/pin_replace_1.html
How do you replace tracker door hinge?
To replace a tracker door hinge, first, remove the door from the frame by unscrewing the existing hinges. Next, take out the old hinge from the door and the frame. Align the new hinge with the pre-drilled holes or mark new ones if necessary, then secure it in place with screws. Finally, reattach the door to the frame by aligning it with the new hinge and tightening the screws.
How can I replace a storm door hinge effectively and efficiently?
To replace a storm door hinge effectively and efficiently, follow these steps: Remove the old hinge by unscrewing it from the door frame and the door itself. Align the new hinge with the existing holes on the door frame and door. Secure the new hinge in place by screwing it into the door frame and door. Test the door to ensure it opens and closes smoothly. Make any necessary adjustments to the hinge for proper alignment. Finish by tightening all screws securely.
How do you change a bad door hinge on a 1957 Thunderbird?
jack the door up on the end of it and unbolt the hinge and replace with the new one.
How do you adjust a door on a Chrysler LeBaron?
you might need to replace the hinge pins.. or the complete hinge
How do you replace a 96 thunderbird driver side door bottom hinge pin?
You have to replace the whole hinge assembly, they don't make a hinge pin kit for the Thunderbird.
How can one replace a cabinet hinge?
To replace a cabinet hinge, you must first remove the screws that attach to the door with either a screwdriver or a drill with screw bit. Next you want to remove the cabinet door. Once you have removed the door, remove the hinge from the cabinet. You can then attach a new hinge. A nice tip is to have a partner hold the door while you screw the hinge back in place.
