Actually the flashers on a 91 Toronado are on the driver side and can be reached by taking off the panel below the dash and the flashers will be near the steering colum on the right side of the colum. Should be in the same place on a 1990.
To fix the driver door handle on a 1990 Pontiac Transport, start by removing the door panel to access the handle mechanism. Unscrew and detach the broken handle, then replace it with a new or functional used handle. Reassemble the handle and door panel, ensuring all components are securely attached. Finally, test the handle to confirm proper operation.
You can find a layout for the fuse panel of a 1990 Toronado Trofeo in the owner's manual. You can also find it at certain auto stores.
Check this answer Door_handle_on_1994_geo_metro_will_open_from_inside_of_car_but_not_outside
In a 1990 Oldsmobile Toronado, the fuse that controls the starter is typically located in the fuse box under the dashboard on the driver's side. You can refer to the fuse box cover or the owner's manual for the specific fuse number and its corresponding function. If the starter isn't functioning, it's a good idea to check this fuse along with the starter relay.
If you do not have an owner's manual for a 1990 Toronado Trofeo, you can find the fuse panel diagram at auto part stores. You can also find them in Chilton manuals.
the starter may be worn on your car if it starts up easily when its cold but slowly turns over when it is at the operating temperature. Replace the starter to your engine.
The SuperChip i installed in my 1990 oldsmobile toronado trofeo gave it 25hp more according to the dyno.
yes
no only up to a 1990 model
Some of them. I was going to say all of them but actually some were made in 1989. All of them were made in 1989 and 1990.
To perform a tune-up on a 1990 Oldsmobile Toronado, start by replacing the spark plugs and wires to ensure proper ignition. Check and replace the air filter and fuel filter for optimal airflow and fuel delivery. Additionally, inspect the ignition timing and adjust it if necessary, as well as change the engine oil and oil filter. Finally, check the battery and connections for any corrosion or wear.