Let me start with this is not a simple task getting at the plug requires removing the dash pad and glove box. Remove the cover over the antenna there are 3 screw mounting the unit. The cable goes down behind the fender, into the side of the firewall. then connects behind the airbag. Some models require you to remove the hood and fender. I have replaced a few and it takes awhile.
To replace the antenna on a 2000 Honda Odyssey, first, remove the plastic cover at the base of the antenna by gently prying it off. Next, unscrew the old antenna from the base by turning it counterclockwise. Once removed, screw in the new antenna in a clockwise direction and ensure it’s securely attached. Finally, replace the plastic cover to finish the installation.
how do you replace a antenna motor for a 2000 Toyota landcruiser
To replace the radio antenna on a 2000 Volkswagen Cabrio, first, remove the interior trim panel around the antenna base by carefully prying it off. Next, unscrew the old antenna from the base and disconnect the wiring. Install the new antenna by reversing the steps: connect the wiring, screw the antenna into the base, and replace the trim panel. Finally, test the radio to ensure proper functionality.
yes
IF you torque the motor up the motor will rock badly, also if you hit the gas hard it will clunk. As a Gm tech. i have never seen a motor mount go on a suburban or any k truck.
To replace the radio antenna on a 2000 Toyota Corolla CE, first, remove the old antenna by unscrewing it from the base, usually located on the rear of the vehicle. If the antenna is broken or stuck, you may need to access the mounting point from inside the trunk. Once the old antenna is removed, screw the new antenna into the base securely. Finally, test the radio to ensure proper reception.
Waht are the stock size for all speakers in a 2000 suburban, 4X4?
To replace the power antenna on a 2000 Corvette Convertible, first, disconnect the vehicle's battery to ensure safety. Then, remove the interior trim panel and any necessary components to access the antenna assembly. Disconnect the antenna's wiring and mounting bolts, then carefully remove the old antenna. Install the new antenna by reversing the process, ensuring all connections are secure before reassembling the trim and reconnecting the battery.
To replace the antenna on a 2000 Cadillac Eldorado, first, ensure the vehicle is turned off and disconnect the negative battery terminal. Remove the interior trim panel near the antenna base, then unscrew the antenna mast and disconnect the wiring harness. Install the new antenna by connecting the wiring, securing it in place, and reattaching the trim panel. Finally, reconnect the battery terminal and test the new antenna for proper function.
Remove the antenna and the coax and where the coax was route the new coax in the same places and runs where the old was and replacw with new and then screw the new antenna back on
How to replace passenger side view mirror on 2000 GMC Yukon?
no cabin filters until 2000 model year