in my 88 astro van I had to completely break out the back handle to first get the door open then I was able to remove interior door cover to do thr replacement. in my 99 asto van I was able to remove the interior cover to open the door then replace the handle.
Replace the door latch.
the same way u change the driver side
There are 2 screws on the inside that get removed and pull the latch down.
The only way is to remove the inside door panel (not an easy job with the door closed). Once the panel is removed, you'll have access to the latch mechanism. You will be having to remove this panel to put a new door handle on anyway.
To fix a driver's side backdoor that won't open on a 1992 Suburban, first check the door latch mechanism for any obstructions or damage. Remove the interior panel to access the latch and cable, inspecting for any broken components. If the latch is stuck, lubricate it with a penetrating oil. If the cable is broken or disconnected, replace or reattach it to restore functionality.
Buy a new one
To fix a door latch on a Chevy Express van, first, remove the interior door panel to access the latch mechanism. Inspect the latch for any broken parts or debris, and clean or replace components as needed. Lubricate the latch with a suitable lubricant to ensure smooth operation, then reassemble the door panel and test the latch for proper functionality. If the problem persists, consider replacing the entire latch assembly.
Unfortunally you can't replace just the cables. They come with the latch assembly and there is a left and right.
Open the door and look where the latch is there should be a black lever push it down and it should unlock the door.
To replace the rear door latch springs in a 1999 Chevy van, first, remove the interior door panel by unscrewing any screws and prying off clips. Once the panel is off, locate the latch mechanism and carefully detach it from the door. Remove the old springs and install the new ones, ensuring they are properly seated, then reassemble the latch and reattach the door panel. Make sure to test the latch for proper operation before finalizing the installation.
To replace the window latch on a 1988 Chevy Blazer K5, first, remove the door panel by unscrewing any fasteners and carefully prying it off to access the latch mechanism. Disconnect the old latch by unscrewing it from the door and detaching any linkages. Install the new latch by reversing the removal process, ensuring all connections are secure. Finally, reattach the door panel, making sure it fits snugly and all screws are tightened.
To fix the hood latch on a 2002 Chevy Cavalier, first, ensure the hood is fully closed. Then, inspect the latch mechanism for any debris or rust that may be affecting its operation. If it's stuck, clean and lubricate it with penetrating oil. If the latch is broken or damaged, you may need to replace it by removing the old latch and installing a new one using the appropriate tools.