1995 geo trunk lid bulb
Remove the plastic housing with small slotted screwdriver. Gently remove the bulb vertically and replace with new bulb. Replace plastic housing until you hear it click into place
i reached in through the fender well and changed the bulb that way
the headlight assembly needs to come out in order to change the bulb ive had to do that to my 98 as well.
The bulb and harness twist off the back of the lens. The lens is a separate unit.
== ==
Remove the tail light assembly (as I recall, it attaches with a couple of screws and is clipped to the body). Remove the bulb holder, replace the bulb, reassemble.
On my 1996 prizm, there are two round-shaped marks on the outer left and right side. I just used a sharp spike to pry off the inner round plastic piece and it pulls out and now you can remove the casing; then I used a Phillips head to remove the center screw and removed the gray/reflective casing so that the bulb can be pulled off.
it is in the trunk you just turn and pull the light out of the socket and the light bulb is a 194 i do believe
which one the center or the side?
how do you change a back up light bulb on a 2008 buick enclave
That'll be a bulb from inside the engine compartment, behind the lamp.
unbolt lens, remove bulb socket quarter turn