0
You have to remove it from inside the trunk. There is a piece of the body attached to the outside of the light or so it looks, but just climb into the trunk through the back of the car and change your bulbs in there... if its the actual break casing, then you will have to remove it from the body, also going through the trunk.
You can do it that way or just open up the trunk and pull the carpet out to expose the brakelights and twist them left or right once there out put new bulb back in fixture and twist that's it that's it
What else can I help you with?
Where is the brake light fuse located on a 1997 Pontiac sunfire in the fuse box?
The 1997 Pontiac brake light fuse is located in the fuse box. The brake light fuse will be labeled as the tail light fuse.
Where is the brake light fuse located on a 1991 Pontiac Sunfire?
Check the main fusebox under the hood.
How do you replace brake light on 2000 pontiac montana?
To replace the brake light on a 2000 Pontiac Montana open the trunk to reveal the housing units. Find the lights and pull the bulbs out. Replace the units.
How do you replace the tail light on a 2001 Pontiac Sunfire?
Read more: http://wiki.answers.com/How_do_you_replace_the_tail_light_in_a_2000_pontiac_sunfire#ixzz1Nur0XSlq
How do you change the tag light bulb in a 1997 Pontiac sunfire?
You must first remove the trunk door facia. (This is the part with the "Pontiac" lights in it.) Then you can get to the bulb to replace it.
Where is the brake switch located in the 2000 Pontiac sunfire?
The brake light switch is located on the brake pedal bracket. You'll need to remove the trim panel beneath the steering column to get to the switch and the connector. FriPilot
Where is the parking brake switch located 1996 Pontiac sunfire?
The brake light switch is located on the brake pedal bracket. You'll need to remove the trim panel beneath the steering column to get to the switch and the connector.
1999 Pontiac Montana brake light bulb replacement?
In order to change the brake light, check your manual for directions. You will need to remove the cover and replace the burnt out bulb.
How do you replace rear brake light on 2002 Pontiac Bonneville?
To replace the rear brake light on a 2002 Pontiac Bonneville, first, open the trunk and locate the tail light assembly. Remove the screws or clips securing the assembly and gently pull it out. Disconnect the electrical connector, then twist the bulb socket counterclockwise to remove it. Replace the old bulb with a new one, reassemble the components, and test the brake light to ensure it works properly.
Warning lights for a 2002 Pontiac Sunfire?
is the trac align light mean
Why does the check gage light come on in a 2001 Pontiac sunfire?
I have an 01 Pontiac sunfire and I have noticed that the check gages light comes on when the gas is low. I have never seen any other indicator come on for low fuel.
How do you install license plate light 1995 pontiac sunfire?
To install a license plate light on a 1995 Pontiac Sunfire, first, locate the light assembly at the rear of the vehicle. Remove the screws or clips securing the light housing, then carefully pull it out. Replace the old bulb with a new one, ensuring it fits snugly, and reassemble the light housing by securing it back with screws or clips. Finally, test the light to ensure it functions properly.
