0
What else can I help you with?
How do you change a wheel cylinder on 1997 Grand Am GT?
Remove wheel Remove brake drum Loosen and remove brake line Remove mounting bolts Pry wheel cylinder off brake shoes Install new cylinder Replace brake lines Replace brake drum Bleed affected brake line
How many feet of brake pipe do you need to replace the brake line.?
measure affected line
How do you replace a rear brake line on 2000 Chevy blazer?
Length of back brake line to replace. hole in it between front and back door
How do you fix a broken brake line in a 1999 GMC Sierra?
Replace the brake line, bleed the brake. top up with brake fluid. Done.
How to replace brake booster ON A 2000 PONTAIC GRAnd prix?
To replace the brake booster on a 2000 Pontiac Grand Prix, first, disconnect the negative battery cable to ensure safety. Remove the vacuum line and any electrical connections to the booster. Then, unbolt the master cylinder from the brake booster and set it aside, followed by removing the bolts securing the brake booster to the firewall. Finally, replace it with the new booster, reassemble the components, and bleed the brake system to ensure proper functionality.
Brake line size 1998 grand am?
3/16"
How can you fix a brake fluid leak when it's a leak in the brake line?
depends where the leak is. In the brake line or at the pump? electric or mech brakes? if its in the line you should be able to replace the line section
Will a brake line for a 2005 Dodge Grand Caravan fit on a 2000 Dodge Grand Caravan?
No
Can you use jb weld on a metal brake line?
replace brake line the damage to the line or if the jb weld gets into the line it will affect how the system works.
How do you replace brake line on a 1999 Mercury Sable?
To replace the brake line on a 1999 Mercury Sable, first, safely lift the vehicle and secure it on jack stands. Locate the damaged brake line, then use a line wrench to disconnect it from the brake components and remove any mounting clips. Cut and replace the line with a new pre-bent brake line, ensuring proper routing and securing it with clips. Finally, bleed the brake system to remove any air before testing the brakes.
How do you replace front passenger side brake line?
Remove the line and replace it. Then make sure to keep the master cylinder full while you & a helper bleed the front brake caliber. Be sure and use brake line tools and not open-end wrenches or you will damage the brake lines.
How do you stop the brake squeal on a 2007 Suzuki Grand Vitara?
The Squeal means its time to replace the Brake pads.
