answersLogoWhite

0

go to autozone or discount and rent a removal tool, will not cost you just leave a deposit& you get your money back when finished with it , just remove bolt at end of compressor and tool does the rest

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

How do you replace the clutch on a 1990 F150?

i learned by watching the video


Why is F150 ac making a clicking noise when turn ac on?

the clutch on your A/C compressor needs to be replaced.


How do you adjust clutch 1988 ford f150?

how do you adjst clutch on 87ford f150


How do you remove ac clutch f150?

To remove the AC clutch on a Ford F-150, first disconnect the negative battery terminal to ensure safety. Next, remove the serpentine belt by releasing the tension from the belt tensioner. Then, unbolt the AC compressor from its mounting and disconnect the electrical connector from the clutch. Finally, remove the retaining bolt or nut from the clutch assembly and pull the clutch off the compressor shaft.


How do you remove AC compressor clutch on a 1998 ford F150?

there are three bolts under the transmission case by the converter clutch butterfly valve take them off and its under there but make sure you have completely removed the gasket


How do you replace a Clutch on a 1989 Ford F150 Fullsize?

This is a big job. You have to take out the transmission. If it is 4 wheel drive it is an even bigger job. The clutch is between the engine and transmission.


1990 ford f150 clutch switch?

Look at the upper end of the clutch pedal under the dash area Look at the upper end of the clutch pedal under the dash area Look at the upper end of the clutch pedal under the dash area


How much is it to replace a clutch for a 2000 ford f150 4.2 liter manual transmission?

Replacing a clutch in your 2000 Ford F1 50 pickup truck will cost approximately $550. The clutch will cost $125 and the labor will cost $425.


How much for a new clutch on a F150?

About 900


How do you replace a clutch slave cylinder on a 97 Ford f150?

To replace the clutch slave cylinder on a 1997 Ford F150, first, safely lift the vehicle and remove the transmission's inspection cover. Disconnect the hydraulic line from the slave cylinder and remove the mounting bolts securing the cylinder. Install the new slave cylinder by bolting it in place and reconnecting the hydraulic line. Finally, bleed the clutch system to remove any air, and reassemble any removed components before testing the clutch operation.


Is the clutch in an 1987 ford F150 hydraulic or not?

Yes,


Where is neutral switch on 2003 ford F150?

how do i find the neutral, or clutch switch on a 2003 ford F150?