drop the gas tank
To replace the fuel pump in a 2000 Saab turbo, first, disconnect the battery to ensure safety. Then, remove the rear seat cushion to access the fuel pump access cover, unscrew it, and disconnect the fuel lines and electrical connectors. After that, carefully remove the old pump from the tank, install the new pump, reconnect everything, and reassemble the access cover and seat. Finally, reconnect the battery and test the system for leaks.
If it has one it will be located directly above the center of the fuel tank. It may very well not have one, which in that case you will have to remove the fuel tank to replace the pump.
Yes... sort of. Which engine are you trying to replace? Which engine do you have from a 1987? Turbo or non-turbo? In 1987 there were two non-turbo engines, both 2.0-liters, an 8-valve and a 16-valve. The fuel systems for those two engines are different. The non-turbo engine in a 1993 900 was 2.1-liters and had yet another fuel system variation. It could be done, but you would have to replace the entire fuel system and probably the ignition system to make it work correctly, and you would have a less powerful engine than was available in 1993.
how to replace a fuel filter on a 1998 montecarlo how to replace a fuel filter on a 1998 montecarlo
how do you replace fuel filter on 1998 Toyota corolla
It is in the gas tank.
Replace the fuel pump in /on the gas tank ≈ $150
your turbo is over boosting mate that's your problem apc valve needing cleaned !
43.7 PSI
The fuel port injector are more than likely clogged. The second option is to make sure the fuel pump is working.
The 1998 Subaru 2.0 liter turbo engine has a rated horsepower of 180. The horsepower can be increased by adjusting the fuel pump.
The fuel pump is in the tank and the tank must be removed to replace it.