0
ok first of all this is a very hard part to change. i would not recamend you try this unless you realy know what you are doing. first u need to get the car in the air' then remove the tires and the half shafes "drive lines" then drop the tranny by removing the blots around the bell housing. and any other linkeges. finealy remove the cluch off the fly weel in the bell housing and replace it. then all u need to do is adjust it and put it all back toget her. like i said it is not esay. i just got done doing my 92 geo storm it took about 1 day. the cluch u can get at any parts store for under $200 dollars. it would cost $800 to have it done by a mechanic so it is better to do it your self if u fell u can.
What else can I help you with?
How do you replace the Clutch bearing in a 92 Geo Metro?
Unfortunately, you have to remove the transmission.
Why is Geo storm shifting into gears but slips?
You probobly need to replace the clutch.
How do you replace a clutch in a 92 Geo Metro?
Call the Kumlord, 586-914-2039
How do you replace the clutch on a 1997 Geo Metro?
You take out the transmissioon, take out the clutch, put a new one in, and put the transmission back in.
How do you replace the clutch on a 1990 Geo Metro?
To replace the clutch on a 1990 Geo Metro, first, disconnect the battery and remove the transmission by unbolting it from the engine and separating it from the drive shafts. Once the transmission is removed, take out the old clutch assembly, including the pressure plate and clutch disc. Install the new clutch disc and pressure plate, ensuring they are aligned properly. Finally, reattach the transmission, reconnect all components, and test the clutch operation before driving.
How do you adjust the clutch pedal on a 1995 Geo Prizm?
how much cost to change a clutch for a geo prizm 1995
Where is the clutch reservoir in a Geo Tracker?
it has a cable. will not have a clutch reservoir
How do you replace a 91 Geo Metro clutch cable?
To replace the clutch cable on a 1991 Geo Metro, first, disconnect the negative battery terminal for safety. Then, remove the clutch pedal cover and detach the old cable from the pedal and the transmission lever. Install the new cable by threading it through the firewall and securing it to the pedal and transmission, ensuring it has the correct tension. Finally, reattach the battery terminal and test the clutch operation before driving.
Were is the clutch reservoir for the 1995 Geo Tracker?
All 1995 GEO Trackers have a clutch cable that is adjustable instead of a clutch reservior filled with hydraulic fluid.
How do you fix the clutch spring on a 1996 Geo Metro?
If you are referring to the little springs inside the clutch assembly itself, you don't fix them, you replace the clutch.See:How_do_you_replace_the_clutch_in_a_96_Geo_MetroIf you mean anything else in there with the clutch, see the above anyway, that'll get you inside.
Where is the clutch reservoir on 1996 Geo Tracker?
The clutch reservoir on a 1996 Geo Tracker is located in the engine compartment, near the firewall. It stores clutch fluid which is pulled into the system as needed.
Where is the clutch sensor on a 1996 Geo Tracker?
on the firewall under the clutch pedal, It is actually a switch
