To replace the clutch on a 1990 Geo Metro, first, disconnect the battery and remove the transmission by unbolting it from the engine and separating it from the drive shafts. Once the transmission is removed, take out the old clutch assembly, including the pressure plate and clutch disc. Install the new clutch disc and pressure plate, ensuring they are aligned properly. Finally, reattach the transmission, reconnect all components, and test the clutch operation before driving.
Unfortunately, you have to remove the transmission.
Call the Kumlord, 586-914-2039
Check this answer Door_handle_on_1994_geo_metro_will_open_from_inside_of_car_but_not_outside
You take out the transmissioon, take out the clutch, put a new one in, and put the transmission back in.
Prices for clutches can be around a big price but for A Geo Metro, it would be around $110
To replace the clutch cable on a 1991 Geo Metro, first, disconnect the negative battery terminal for safety. Then, remove the clutch pedal cover and detach the old cable from the pedal and the transmission lever. Install the new cable by threading it through the firewall and securing it to the pedal and transmission, ensuring it has the correct tension. Finally, reattach the battery terminal and test the clutch operation before driving.
That depends on what it is doing or not doing.
it should be able to
18 lbs
If you are referring to the little springs inside the clutch assembly itself, you don't fix them, you replace the clutch.See:How_do_you_replace_the_clutch_in_a_96_Geo_MetroIf you mean anything else in there with the clutch, see the above anyway, that'll get you inside.
Your local library has repair manuals.
Yes it shoud fit. Geo metros had the same headlights from 1995 - 1999