answersLogoWhite

0

That depends on what it is doing or not doing.

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

How do you fix the fuel pump on a 1991 Geo Metro?

You replace it you do not fix it.


How do you fix the clutch spring on a 1996 Geo Metro?

If you are referring to the little springs inside the clutch assembly itself, you don't fix them, you replace the clutch.See:How_do_you_replace_the_clutch_in_a_96_Geo_MetroIf you mean anything else in there with the clutch, see the above anyway, that'll get you inside.


How do you fix a speedometer on a Geo Metro?

kick it. that should help


How do you fix high idle speed on a 93 metro geo?

manually under the hood.


What is the problem when an automatic transmission for a 1997 Geo Metro LSI will not go into reverse?

Have you fixed this yet? The fix is cheap and easy. Let me know if you haven't yet. Mr Geo Metro leehduncan@verizon.net


Why is my Geo Metro is stuck in park and how do you fix it?

put your foot on the brake.... if that doesn't work you have to fix the wiring for the brake/transmission interlock


1996 Geo Metro lsi it will go from first to second but it wont go to drive three speed automatic?

Have you got this fixed yet? if not contact me and I'll give you the info to fix it. The fix is cheap and easy. 8-9-08 Mr Geo Metro leehduncan@verizon.net


How do you fix a Turn signal for a 1996 Geo Metro?

If the turn signal bulbs work but just do not flash, replace the Flasher Relay.


Find engine diagram on a geo metro?

Oh honey, you're better off finding a needle in a haystack. But if you're feeling lucky, try googling "Geo Metro engine diagram" and see if someone out there has mercy on your poor soul. Good luck, you'll need it!


1997 geo metro and the drivers side is making a loud grinding noise when the brakes are applied?

sounds like you need pads cheap fix


Your clutch has been replaced and you are not getting any pressure on your clutch pedal how on a 1991 Chevy Cheyenne 454 how do you fix it?

if the clutch is hydraulic operated, bleed the cluth if it is mechanical cluth, adjust the linkages


Why does the turn signals not work on your 1990 geo metro you've replaced switch and checked all bulbs hazards work?

Look at the relay for the flashers, that should fix your problem.