0
You wil need.
Basic tools such as screw driver, one size is needed (not sure which) looks like a + head.
Open the glove box, inside there are 5 screws holding the inner front cover. Remove these placing them some where safe. You will need to wiggle the cover to get the arm out of the right hand side, this is not attached to anything.
Once removed the latch is removed with the same screw driver and two screws.
Remove the latch.
If its broken then you maybe able to glue the broken parts back together with super glue or buy another one from the internet.
replacing is the reverse of removal.
What else can I help you with?
How do you replace glove box latch 03 Chevy Venture?
There are 2 screws on the inside that get removed and pull the latch down.
Can i use a Chevy Cavalier ls trunk latch on a Chevy Cavalier convertable?
Most likely.
How do you fix hood latch on 2002 Chevy cavalier?
To fix the hood latch on a 2002 Chevy Cavalier, first, ensure the hood is fully closed. Then, inspect the latch mechanism for any debris or rust that may be affecting its operation. If it's stuck, clean and lubricate it with penetrating oil. If the latch is broken or damaged, you may need to replace it by removing the old latch and installing a new one using the appropriate tools.
How do you replace lock on glove box on 1999 Chevy Malibu?
I purchased a used 1999 Chevy Malibu and had to replace the glove box because the latch was broken. I purchased another a the local salvage yard and I want to know how to take the lock out of the old door and install it in the new one.
How do you remove a non locking glove box latch on 1979 silverado?
The 1979 Chevy Silverado glove box latch is held in place with two retaining screws. Remove the retaining screws and the glove box latch will come off.
How do you replace trunk lock for 1995 Chevy cavalier?
* Remove the trunk lid latch * Detach the lock release box from the latch assembly * To detach the lock cylinder from the trunk lid pry off the retainer
How do you replace 1994 Nissan 300zx glove box latch?
To replace the glove box latch on a 1994 Nissan 300ZX, first, remove the glove box by unscrewing the screws that secure it to the dashboard. Once the glove box is out, detach the old latch by unscrewing it from its mounting location. Install the new latch by securing it in place, then reassemble the glove box by reinserting it into the dashboard and tightening the screws. Finally, test the new latch to ensure it operates correctly.
How to manually open the hood of a '98 Chevy cavalier?
The easy way to open the hood manually on a 1998 Chevy Cavalier, when the cable is not working is to put the car on a hoist and use a long pole to trip the hood latch. Then lower the vehicle and open the hood the rest of the way. Replace or repair the cable for the hood latch before closing the hood.
How do you replace 1993 Nissan 300zx glove box latch?
To replace the glove box latch on a 1993 Nissan 300ZX, first, open the glove box and remove any contents. Locate the screws securing the glove box assembly to the dashboard and remove them. After detaching the assembly, you can access the latch mechanism; unscrew or unclip the old latch and install the new one. Finally, reassemble the glove box and secure it back in place with the screws.
Your interior door latch on your 1997 Chevy silverado is not releasing the latch How do you fix?
Replace the door latch.
How do you remove the glove box latch on a 1988 Chrysler Lebaron?
To remove the glove box latch on a 1988 Chrysler LeBaron, first, open the glove box and locate the screws securing the latch. Use a screwdriver to remove these screws, then carefully pull the latch away from the glove box door. If the latch is clipped in, gently pry it out without damaging the surrounding plastic. Once removed, you can replace or repair the latch as needed.
How do you replace trunk release cable on Chevy cavalier?
To replace the trunk release cable on a Chevy Cavalier, first, remove the interior panel of the trunk area to access the cable mechanism. Disconnect the old cable from the latch and the release handle. Install the new cable by securing it to the latch and reattaching the release handle, then test the operation before replacing the interior panel. Finally, ensure all components are properly secured and the panel is reinstalled.
