How do you replace the harmonic balance on a 2000 Dodge Intrepid?

Answer 1

Remove the upper radiator support going fender to fender, and the hood latch. Remove the upper radiator hose. Remove the four bolts securing the radiator fans to the radiator and remove them. Loosen the 15mm nut on each Idler pulley (3.2), or the tensioner holding bolt on just the a/c idler (2.7L), and loosen the jam bolt on the side of the idler to release tension on the belts. Use a breaker bar to release tension on the a/c belt on 2.7 engines. Remove the nut in the center of the drive pulley. Use a 3 jaw puller and remove the pulley. Chrysler 3 jaw puller is best to use. Tap the pulley back on with a hammer until you can get the bolt started. Once the bolt starts, tighten it all the way down to draw the pulley on and torque it to 65 ft lbs. You may need the Chrysler drive pulley holding tool, and puller. Everything else is reverse of removal. Check out dodgeintrepid.net for a ton of info on these cars.