The best way it to take your Ford Explorer to the nearest Ford Dealer. He will doubtless employ mechanics who will be glad to replace the headlight assembly.
Remove the wiring harness from your 2000 Kia headlight. Remove the headlight assembly retaining bolts. Reverse the process to install your new headlight assembly.
go to back of headlight assembly and twist it out.
take it out then replace it
To replace the headlight assembly on a 2000 Pontiac Grand Am, first, remove the screws and clips securing the assembly to the vehicle. Disconnect the electrical connector from the back of the headlight and carefully pull the assembly out. Install the new assembly by connecting the electrical connector and securing it with the screws and clips. Finally, test the headlights to ensure they're functioning properly.
For the 1994 model (B3000), you can't change just the bulb. You have to change the headlight assembly.
If you're talking about the headlight, the "lens cover" is not a separate part, you need to replace the whole headlight assembly.
If just the bulb then there is lots of space you can just unscew and replace if entire headlight then unscrew the holding bolts and pull out. Then replace with new assembly.
To remove the headlight assembly on a 2000 Dodge Caravan, first, open the hood and locate the retaining screws or bolts securing the headlight assembly. Typically, you will need to remove a few screws from the top and possibly a clip from the side. Once the screws are removed, gently pull the headlight assembly forward to disconnect it from the car, and carefully unplug the electrical connector. After that, you can replace or service the assembly as needed.
To replace the whole headlight, the bumper has to be taken off of the 00 Celica. No way around it. =\
you dont..they are set in a harness in the back of the headlight assembly which is locked in place..you turn it to unlock it and remove it.
I'm trying to replace the headlight assembly for a 2000 Jeep Grand Cherokee Lerado. What bolts or screws do I remove
Hi, You have to remove the entire headlight assembly to get to the bulb, which is located in the back of the assembly. There are three wing nuts that hold the assembly in, and those will have to be removed. Then remove the side signal assembly first, then the headlight assembly. I have provided a link that shows exactly how this is done and where these wing nuts are. Good Luck