0
Unplug the wire connector from the bulb, pull off the big black round rubber water seal, jiggle the metal locking pin (kinda like a mousetrap) to get it to open, then pull out the bulb. (On the passenger side, you probably need to unbolt the fuse box first to be able to reach). Installing the headlight is the same process in reverse. Make sure to put the water seal back on in the correct orientation (there's a little line that should be on the top). Takes maybe 10 minutes. GE 9003 HB2 bulb, can find at Walmart and elsewhere.
What else can I help you with?
How do you replace the headlight bulb located on a 1998 Chevrolet Prizm?
the headlight assembly needs to come out in order to change the bulb ive had to do that to my 98 as well.
Will a Toyota corolla headlight 1998-2000 fit a Chevy Prizm 1998-2002?
yes
Where is the heater control valve located on a 1998 prizm?
Locating on a 1998 prizm - fine idea
How do you replace the headlight bulb located on a 1998 Acura TL 3.2L?
See the following site:
How do you replace the headlight bulb located on a 1997 GMC Safari?
You replace the bulb the same as a 1998, which is answered further down the page.
How do you replace the turn signal on a 1998 Prizm?
pep pep
1998 Bounder motorhome need to replace headlight switch?
We have a 1998 Bounder Motorhome (with ford engine) how do we replace the headlight switch?
Can anyone tell me where the horn is under the hood of a 1998 Chevy Prizm?
It is behind the headlight on some cars.
How do you replace the headlight bulb located on a 1998 Chevy Blazer?
There are two clips on the wall that holds the headlights. Push the clips away and pull the headlight housing out.
How to replace a 1998 zx2 headlight?
the bumper will have to be removed.
How do you replace the light bulb of the headlight on a 1998 Chevy Prism?
the headlight assembly needs to come out in order to replace the bulb.
How do you replace the headlight assembly located on a 1998 Isuzu trooper?
To replace the headlight assembly on a 1998 Isuzu Trooper, first, open the hood and remove the screws or bolts securing the headlight assembly, typically located at the top and side. Disconnect the wiring harness from the back of the assembly and carefully pull the old assembly out. Insert the new headlight assembly, reconnect the wiring harness, and secure it with the screws or bolts. Finally, test the new headlight to ensure it functions properly.
