To replace the heater and air conditioning fan in a 2000 Oldsmobile Intrigue, first disconnect the negative battery cable to ensure safety. Remove the dashboard trim and any necessary panels to access the blower motor, which is located under the passenger side dash. Disconnect the wiring harness and remove the screws securing the blower motor, then replace it with the new unit, reassemble the components, and reconnect the battery. Always consult a repair manual for specific instructions and safety precautions for your vehicle.
To replace the heater core on a 1999 Oldsmobile Intrigue with a 3.8L engine, first, disconnect the battery and drain the coolant. Then, remove the dashboard and the HVAC assembly to access the heater core. Disconnect the hoses from the heater core, remove any retaining screws or clips, and replace the old core with the new one. Reassemble everything in reverse order, refill the coolant, and check for leaks before reconnecting the battery.
Behind the firewall, near the center of the engine compartment.
You will need to remove the water supply hoses from your 1998 Oldsmobile Intrigue heater core. Remove the heater core retaining bolts. Reverse the process to install your new heater core.
How to replace a heater hose on a 2001 Oldsmobile silloute
how do you replace a heater core in a 91 Oldsmobile 98
how do you get to it
If the AC is Blowing cold and turn off and on, the AC/heater control switch is bad. Replace it on eBay for around fifty dollars. Work great now.
The heater core may be stopped up. Try flushing it, or replace it.
The resitors or contacts to the resistors have quit. Start at the switch, check continuity/resistance on the input and output for each speed.
there a switch on your heater control panel.be more specific to get a proper answer
You can find the 1993 Oldsmobile Cutlass block heater on the right hand side of the engine block. You can follow the block heater cord directly to the block heater.
How do you change the heater core on a 1989 Oldsmobile Cutlass Ciera? or where can I get the Info on replaceing it