answersLogoWhite

0

What else can I help you with?

Related Questions

How do you replace the crankshaft sensor in a 1985 Oldsmobile Calais Supreme LN7 3.0 liter engine?

changing the crankshaft sensor


How do you replace a wheel berring on an 1985 Oldsmobile regency 98?

how do you replace a wheel bearing on an 1985 oldsmobile regency 98


What motors interchange with 1988 Oldsmobile calais 2.3?

The Oldsmobile Calais, also known as the Cutlass Calais, was produced by General Motors from 1985 to 1991. In 1987, the Quad 4 engine was developed and the 1988 Calais was fitted with it. All?æof the Quad 4 14 engine types of the 2.3 liter version are interchangeable on the 1988 Calais.


How do you replace a wheel berring on an Oldsmobile regency 98?

how do you replace a wheel bearing on an 1985 oldsmobile regency 98


How do you install a heater core on a 1985 Oldsmobile Cutlass Supreme?

cutlass supremes are so baller


How do you replace a heater core on a 1985 crown Victoria?

The dash has to be removed to gain access to the heater box. The heater box then comes out and is split open to replace the core.


Where is the heater coil located on a 1985 delta 88 Oldsmobile?

Usually passenger side behind glove box


How do you replace a transmission seal on 1985 Oldsmobile delta 88?

You gotta use tools.


Replace the heater core on a 1985 Chevy van G30?

Remove the water supply hoses from your 1985 Chevy heater core. Remove the heater core retaining bolts. The heater core will come out. Reverse the process to install your new heater core.


How do you replace the heater core 1985 bronco 2?

To replace the heater core of a 1985 Bronco 2, open the glove box and push on the 2 tabs that hold it in place. After removing the entire glove box, remove the round plastic screws of the heater core. Remove the old and replace with a new one.


What is the oil filter capacity of an 1985 Oldsmobile 98 regency brougham?

5 quarts if you remove and replace filter.


How do you replace a thermostat on a 1985 Oldsmobile Cutlass Supreme?

First, remove the thermostat housing. Then grab the thermostat by hand and remove it.