answersLogoWhite

0

To replace the heater core of a 1985 Bronco 2, open the glove box and push on the 2 tabs that hold it in place. After removing the entire glove box, remove the round plastic screws of the heater core. Remove the old and replace with a new one.

User Avatar

Wiki User

10y ago

What else can I help you with?

Related Questions

Replace the heater core on a 1985 Chevy van G30?

Remove the water supply hoses from your 1985 Chevy heater core. Remove the heater core retaining bolts. The heater core will come out. Reverse the process to install your new heater core.


How do you replace a heater core on a 1985 crown Victoria?

The dash has to be removed to gain access to the heater box. The heater box then comes out and is split open to replace the core.


How long does it take to replace a heater core for a ford bronco 1988?

I have a 1987 ford bronco and I changed the heater core in about 15 minutes. All you have to do is remove glove box and there is a panel with a few screws around it. and there you go.


How do you change a heater core in a 1987 Ford Bronco II?

change out the heater core


How do you replace the heater core in a 1992 ford bronco?

Drain all coolant from your system, disconnect heater core hoses from heater core in engine compartment. Remove the glove box, open plastic housing, and theres your heater core. No need to remove dash if only replacing the core.


How do you replace the heater core on a 1985 Oldsmobile Calais?

To replace the heater core on a 1985 Oldsmobile Calais, start by disconnecting the battery and draining the coolant from the radiator. Remove the dashboard components and the center console to access the heater core housing. Disconnect the hoses connected to the heater core, unbolt it from the housing, and replace it with the new core. Reassemble the components, refill the coolant, and check for leaks before starting the vehicle.


How do you replace heater core in 1985 Chevy van?

To replace the heater core in a 1985 Chevy van, start by disconnecting the battery and draining the coolant from the radiator. Remove the dashboard and the heater assembly cover to access the heater core. Disconnect the hoses and any attached components, then remove the old heater core and install the new one. Reassemble everything, refill the coolant, and check for leaks before reconnecting the battery.


How do you replace the heater core on a jimmy?

How do you replace the heater core on a jimmy?


If the previous owner put a loop on the heater core how can you find out where the heater hoses go on the engine of a 1985 Camry?

If they disconnected the heater core, it means it was leaking. Get a manual on your car from the parts store and it will show you how to replace the heater core also


How do you replace the heater core in a 1985 Buick LeSabre?

To replace the heater core in a 1985 Buick LeSabre, start by disconnecting the negative battery cable and draining the coolant from the radiator. Remove the dashboard to access the heater core; this involves taking out screws and clips securing the dash. Once exposed, detach the heater core from the heater box by removing the inlet and outlet hoses, then replace it with the new unit, reassemble everything, and refill the coolant. Ensure to check for leaks after completing the installation.


How do you replace the heater core in a 1994 Cadillac STS?

how do u replace the heater core


How do you replace 1985 Chrysler new yorker heater core?

To replace the heater core in a 1985 Chrysler New Yorker, first, disconnect the negative battery cable and drain the coolant from the radiator. Remove the dashboard and any components obstructing access to the heater core, including the heater hoses, which should be disconnected from the engine. Replace the old heater core with the new one, reassemble the dashboard and components, and refill the cooling system with coolant. Finally, reconnect the battery and check for proper operation and leaks.