0
To replace the idle air control (IAC) motor on a Ford Windstar, first, disconnect the negative battery terminal to ensure safety. Locate the IAC motor, which is typically found on the throttle body; disconnect the electrical connector and remove the mounting screws. Carefully take out the old motor and install the new one, making sure to secure it properly and reconnect the electrical connector. Finally, reconnect the battery and start the vehicle to ensure proper operation.
What else can I help you with?
Rough idle smell of gas ford windstar?
rough idle smell gas
Where is the idle speed control motor on a 1998 ford escort ZX2?
where is the idle control motor for a 1998 ford escort
1996 ford windstar van the transmission jerks sometimes?
I have a 2000 Windstar and it does this at times but it is normally when I start it and go to quickly not letting it idle down. Also mine has 322,000 with original transmission and motor and it has done it for several years.
Can the idle air control valve be adjusted on 98 ford windstar?
no.fully unajusteble
Your 1999 ford windstar run real rough at an idle but gets better when driving at higher speeds?
You need to replace or clean the ERG valve. This will help with your milage too.
Why would a ford windstar shake when in idle?
You might want to check your main vacuum line
Why would a Ford Windstar stall at the stop sign especially in the warm weather?
Hey Kulwant==It is probably the idle speed motor not reacting when a load is placed on the engine. Sometimes you can remove them and clean them and they will be ok. GoodlukcJOe
Why does your 2000 ford f250 5.4 idles fast?
the iac motor is faulty replace....(automatic idle control) easy fix 2 bolts and 2-3 wire connections.
What controls the idle on a 1999 ford windstar?
The computer does - there is no way to adjust it. If it is improper something is wrong with one of the sensors - that is the most likely problem.
What does the code P1507 mean on a 2003 Ford Windstar?
Trouble code P1507 means: Idle air control (IAC) underspeed error
Iat sensor 99 Ford Windstar?
Might this supposed to be IAC (Idle Air Control)??If so, see "Related Questions" below for more
Why would a 1998 Ford Windstar start running only at high rpms?
Either the throtle cable is hanging or the idle control solonoid is not working
