usually buy pulling the old one off and putting new one in its place
au falcon dosent have a distrutor cap they run 6 pin coil pack
To change a coil pack on an AU Falcon, first, ensure the engine is cool and disconnect the negative battery terminal for safety. Remove the engine cover, if applicable, to access the coil packs. Unplug the electrical connector from the coil pack, then unscrew the mounting bolts and carefully lift the coil pack out. Install the new coil pack by reversing the process, ensuring all connections are secure before reconnecting the battery.
To change the plugs and leads on an AU Falcon, first ensure the engine is cool and disconnect the battery. Remove the ignition leads by gently twisting and pulling them off the spark plugs, then unscrew and remove the old spark plugs using a spark plug socket. Install the new spark plugs by hand-tightening them, followed by a quarter turn with the socket wrench. Finally, attach the new ignition leads, ensuring they are securely connected to both the plugs and the ignition coil.
its in the fuse panel good luck
The XF falcon bullbar will fit a AU falcon with a little bit of fabrication.
Ford AU Falcon was created in 1998.
You need an AU Falcon towbar.
1 5 3 6 2 4. au falcons have coil packs. not distributors. if you look at the coil from the front of the car facing backwards. the firing order is: (engine) 3 4 2 5 <----------- Coil Pack 1 6 (front of car)
The barrel is not timed properly to the switch.
no
Only the AU IRS version.
ford falcon au's take 5x7 speakers front and back