To change the plugs and leads on an AU Falcon, first ensure the engine is cool and disconnect the battery. Remove the ignition leads by gently twisting and pulling them off the spark plugs, then unscrew and remove the old spark plugs using a spark plug socket. Install the new spark plugs by hand-tightening them, followed by a quarter turn with the socket wrench. Finally, attach the new ignition leads, ensuring they are securely connected to both the plugs and the ignition coil.
au falcon dosent have a distrutor cap they run 6 pin coil pack
How do change an air conditioning filter on a ford falcon 2006 Mk2 ute
The XF falcon bullbar will fit a AU falcon with a little bit of fabrication.
Ford AU Falcon was created in 1998.
You need an AU Falcon towbar.
no
Only the AU IRS version.
ford falcon au's take 5x7 speakers front and back
To change the coolant in an AU Ford Falcon 2001 model, open the radiator drain plug and add warm tap water once all coolant stops coming out. Again drain the radiator and add the coolant.
In the AU Falcon, the spark plug leads should be connected to the distributor in the firing order of 1-5-3-6-2-4. The cylinder numbering starts with cylinder 1 at the front of the engine, and the leads should be arranged clockwise around the distributor cap. Make sure to confirm the correct lead placement to ensure proper engine operation.
pressure plate torque settings for ford falcon au 6 cylinder
ILLEGALY