To replace the multifunction control in a 2001 Oldsmobile Intrigue, first disconnect the battery to ensure safety. Remove the steering column covers by unscrewing the necessary screws, then detach the multifunction switch from the column by unscrewing it and disconnecting the wiring harness. Install the new multifunction control by reversing the disassembly steps, ensuring all connections are secure before reattaching the battery. Finally, test the functionality of the new control to confirm proper operation.
lower the engine from the car
I had the same problem and it was the ignition switch. Replace it and that should would. You could try to clean the contacts, that should work just as well.
it should be under the cowl on the pass side of the car
The multifunction switch attaches to the steering column. It contains the turn signals, wipers, headlights, etc....
You would have to replace the whole thing, it only about $30 its a locking pin that looks like a staple pull it out and it should come off....... easy do it your self
You have to replace the lower control did assembly .
To replace the coolant reservoir on a 2001 Oldsmobile Intrigue, first ensure the engine is cool and disconnect the negative battery cable. Remove any mounting bolts or clips securing the reservoir, then carefully detach the hoses. Install the new reservoir by attaching the hoses and securing it with the bolts or clips, then refill the coolant and check for leaks before reconnecting the battery.
A 2001 Oldsmobile Intrigue with the 3.5L V6 engine takes 5.6 quarts of oil.
check fuse. they are all conected.
For the engine, under the plastic engine cover (sight shield). For the a/c, under the right side of the dash.
do you mean the thermostat
You need to change the K134 Multifunction Relay module: The Multifunction Module under the IP(Under the Drivers side dashboard) . It is factory part number 90494163 and is around $85 plus tax at the dealer.