answersLogoWhite

0

  1. Remove the tilt steering lever.
  2. Remove the steering column cover.
  3. Unplug the wire going to the switch.
  4. Now you can remove the bolts that hold the switch to the column.

An instructional video of how to remove the multifunction switch on a 1993-1997 Dodge Intrepid has been included below.

User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

How do you replace turn signal switch on a 1997 peterbuilt?

Remove the plastic shielding from around the steering column, unplug the multifunction switch, remove the bolts used to mount the multifunction switch. Installation is the opposite of reverse


1997 accord you turn on your headlights and your windshield wipers comes on?

You have a problem with your multifunction switch, probably the only way to fix it is to replace the switch.


How do you replace multifunction switch on 1997 Lincoln town car?

To replace the multifunction switch on a 1997 Lincoln Town Car, first disconnect the negative battery cable to ensure safety. Remove the steering wheel by taking out the retaining nut and using a steering wheel puller if necessary. Next, detach the plastic covers around the steering column to access the multifunction switch. Finally, disconnect the wiring harness from the old switch, remove it, and install the new switch by reversing the disassembly steps, making sure everything is reconnected properly before reattaching the steering wheel and covers.


Why would blinkers and hazard lights on a 1997 Dodge Intrepid stop working?

u need to replace with a turnsignal light switch . there is a short in steering column


How do you replace tie-rod on a 1997 Dodge Intrepid?

Inner or outer?


Why would the windshield wipers come on 1997 voyager when turning a corner?

Problem with multifunction switch in steering column


Where is the headlight multifunction switch located on 97 Ford F-150?

On a 1997 Ford F-150 : The multifunction switch is inside the steering column cover , except for the turn signal lever and the hazard flasher button that sticks out of the cover


Where is the Inertia Switch on a 1997 dodge Intrepid?

Dodge doesn't use inertia switches.


What is Freon capacity 1997 intrepid?

Since a 1997 Intrepid has a high pressure cut off switch, it is OK to put a whole 1 pound can of Freon in it. You will need to do this after charging the system.


Fuel reset switch 1997 Dodge Intrepid?

Dodge doesn't use reset switches.


1997 Pontiac sunfire brake lights are all out?

Check ur fuses first of course, then pull the bulbs make sure they are good it will probably be the multifunction switch a bad ground or s bad power wire get a voltage tester and test the wires if nothing replace multifunction switch....like 35dollars if still nothing u have a bad ground time to start chasing wires...


How do you replace the dimmer switch in a 1997 Honda Accord?

how to change dimmer switch on 1997 Honda accord