have a garage do it. it is a pain in the rear. you have to drop the basket 1st. with a new one and labore your looking at about 1300$. i just had it done.
by changing it
Gm had a recall on this. Take it to a dealer to do it for free.
Most rack and pinion assemblies require specialized tooling and machining to repair. That is why it is most common to replace the assembly with a professionally repaired or rebuilt unit.
Looking through the users manual is the best way to do this. You can also get the help of a mechanic to make sure that you are doing it right.
Replace the pump before the serpentine belt and rack and pinion are damaged.
how to replace the rack and pinion on a 2202 trailblazer
To replace the rear axle pinion bearing on an '84 GMC Vandura, first, safely lift and support the vehicle, then remove the driveshaft and any rear axle cover. Next, remove the pinion nut and yoke to access the pinion gear. Carefully pull out the pinion assembly, replace the old bearing with a new one, and reassemble by reversing the steps, ensuring proper torque on the pinion nut and checking the bearing preload. Always consult a repair manual for specific torque specifications and procedures.
To replace the rack and pinion on a 2003 Chevy Venture, start by lifting the front of the vehicle and securing it on jack stands. Remove the front wheels, then disconnect the steering column from the rack and pinion, along with the inner tie rod ends. Drain the power steering fluid, unbolt the rack from its mounts, and carefully pull it out. Install the new rack by reversing the disassembly steps, ensuring all connections are secure and refill the power steering fluid before testing the steering.
replace rack and pinion on 2008 honda odyssey
Which differential bearings? Pinion bearing? Carrier bearings? End axle bearings?
how to install and replace a rack and pinion on Honda accord 1994 lx
What is the cost to replace a rack and pinion on 94 es300 lexus