I think, and don't quote me on this, but I think that Chevy might have a recall for one of the rear seat belts because it twists and becomes stuck. Should prob check online before having a dealer jerk you around. Hope this helps.
remove the seat to access screws
To replace the middle rear seat belt on a Ford Mondeo MK3 (2001), first, remove the rear seat cushion by unbolting it from the frame and lifting it out. Next, access the seat belt mechanism by removing any covering or trim that conceals it. Detach the old seat belt from the anchor points and install the new one by following the reverse order, ensuring it is properly secured. Finally, reattach the rear seat cushion and test the seat belt for proper operation.
To unstick a rear passenger side seat belt in a 2004 Chevy Aveo, first check for any obstructions or twists in the belt. Gently pull the belt to see if it will come free, or try to retract it while applying slight pressure. If that doesn’t work, remove the seat belt from its anchor point and inspect the mechanism for any debris or damage. If you're unable to resolve the issue, it may be best to consult a professional for repair or replacement.
To replace the rear seat belts in a 2004 Honda Element, start by removing the lower seat cushion by pulling it up and out. Next, unbolt the seat belt anchors using a socket wrench; there will typically be bolts at the floor and possibly at the vehicle's side or wall. Carefully detach the seat belt from the retractor and replace it with the new belt, ensuring all components are secured properly. Finally, reassemble the seat cushion and test the functionality of the new seat belts for safety.
no. check fuses and relays.
Grasp rear SEAT CUSHION, force toward rear of vehicle then pull up. Do both right and left sides of seat. Seat belt anchor volts will be visable. SEAT BACK unbolts at the bottom.
== ==
Go to an auto wrecker, the dealer charges you 300 bucks with labour per belt!
16
how can i replace the seat belt for an altima 2005, this seat belts was locked because the air bags was activated Thanks
To replace a 2001 Infiniti QX4 back seat belt, first, remove the lower seat cushion by pulling it up and out. Next, locate the seat belt anchor bolt, typically found at the lower rear of the seat, and remove it using a socket wrench. Detach the seat belt from its upper anchor point, usually found near the roof or side pillar. Finally, install the new seat belt by reversing the steps, ensuring all bolts are tightened securely.
Replace the seat belt.