open hatchback, take screws out in jam area,,the you can tilt brakelight asembly and pull off,,then change bulb and put abck
It is a Pontiac Aztek. Light a match and get some marshmallows.
The easiest way is to bring it to a chevy dealer, because the two were companion brands.
pictures of how to change front signal bulbs on a 2004 grand prix pontiac
To replace the rear tail light on a 2004 Pontiac Aztek, first, open the rear hatch and locate the tail light assembly. Remove the screws or bolts securing the assembly, then gently pull it away from the vehicle. Disconnect the electrical connector and remove the old bulb by twisting it counterclockwise. Insert the new bulb, reconnect the electrical connector, and secure the tail light assembly back in place.
Read you owner's manual.
number 36
Normally it means the alternator is defective.
To change the license plate light bulb on a 2001 Pontiac Aztek, first, open the rear hatch to access the light assembly. Use a flathead screwdriver to gently pry off the lens cover. Once the cover is removed, twist the bulb socket counterclockwise to release it, then pull out the old bulb and replace it with a new one. Finally, reinsert the bulb socket, replace the lens cover, and ensure everything is securely in place.
Hey Rick==Simply get to the back of the light assy and turn the bulb counterclockwise to remove. GoodluckJoe
underneith the front bumber twist counter clockwise replace bulb
take the light off and put the other one in you jack@$$
raise the hatch pull down on the carpet, determine which light is out and twist to come out, you dont replace from the outside of the car!!!