"Replacing tail/brake/turn/backup lamp bulbs:
1.) Make sure the headlamp switch is in the OFF position, then open the liftgate to expose the lamp assembly screws. 2.) Remove the two screws from the lamp assembly. 3.) Pull the lamp assembly towards the rear and side of the vehicle at an angle carefully removing it from the vehicle. 4.) Rotate the bulb socket counterclockwise and remove from the lamp assembly. 5.) Pull the bulb straight out of the socket and push in the new bulb. 6.) To complete installation, follow the removal procedure in reverse order." Note---> These screws are only screwed into plastic! Do NOT overtighten them!
One or two front turn signal bulbs is busted. Check your front turn signal bulbs and replace it.
Either the driver is indication the wrong way or the wiring to the indicators is crossed.
No, you cannot replace a faulty Ford Sport Trac cluster with a cluster from the 2005 Explorer.
is that even a full question?
its on the inside of the car , driver side black box shape like triangle remove the cover,,the flasher,auto-windows and haz-lights
take the three or 4 Phillips screws out of the taillight, remove the light assembly and replace the bulb......all with the tailgate up of course.....
Yes any tail lights/head lights, pretty much everything but doors will fit on both ford explorer sports and 4dr explorers between the years 1998 and 2001
behind dash drivers side mounted on steering column
In a 2002 Ford Explorer Sport Trac : In the Power Distribution Box ( which is " live " ) located in the engine compartment , on the drivers side of the engine compartment ( mini fuse # 29 is a 15 amp fuse for the fog lights )
According to the 2005 Ford Explorer Sport Trac Owner Guide : ( the head lights take bulb # 9007 )
Check in the center stack of the dash , just to the right of the radio I believe there is a push button to turn the fog lights on and off
That's a job for a professional, if it's not done properly a person can get injured.