answersLogoWhite

0

You will have to give more information to get a good answer. Two wheel or 4 wheel drive, front or rear, etc.,, What year is it?

Front wheel bearings on the mid 90" should be easy to change. Just remove the wheel, remove the bearings and the races (will have to be pressed or knocked out of the hub) then replace the races, first, then the bearings. Put plenty of grease on them . You should replace the seals as well.

On the 1999 and probably later, you will find that they have a "double set" of bearings for each wheel with only one bearing race. You will have to have the old race pressed out at a machine shop and the new one pressed in, again press the bearings and put in new seals. Will cost over $100 per wheel for the bearings and machine work in most places, plus the cost of the seals.

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

How do you replace a rear wheel bearing and seal on a 98 Toyota Tercel?

how do i replace a wheel seal


How do I replace the rear wheel bearing and seal on a 1997 Tahoe?

To replace the rear wheel bearing and seal on a 1997 Tahoe, first lift the vehicle and remove the rear wheel. Then, take off the brake assembly and axle nut to access the bearing. Use a bearing puller to remove the old bearing and seal, clean the housing, and install the new seal followed by the new bearing. Finally, reassemble the axle nut and brake assembly, and reinstall the wheel.


Replace rear wheel bearing on 2002 Mercury Mountaineer?

Remove the rear tire and wheel. Remove the axle end cap. Remove the rear wheel seal. Remove the rear wheel bearing. Reverse the process to install the new wheel bearing.


How do you replace rear wheel bearing and seal on 3.2 tl?

First, the car will need to be raised. Then the rear wheel should be removed. Now the existing bearing and seal can be removed and the new ones fitted.


How do you replace rear wheel bearing on a Ford Fiesta 2003?

Remove the rear tire and wheel. Remove the axle end cap. Remove the wheel bearing seal. Remove the wheel bearing. Reverse the process to install the new wheel bearing.


How do you replace rear wheel bearing and seal on 3.2 acura TL?

First, the car will need to be raised. Then the rear wheel should be removed. Now the existing bearing and seal can be removed and the new ones fitted.


How do you replace a rear wheel bearing on a 1997 Mercury Cougar?

You will need to remove the rear tire and wheel. Remove the axle end cap. Remove the wheel bearing nut. Remove the wheel bearing and the wheel seal. Reverse the process to install the new wheel bearing.


How do you replace vt commodore rear wheel bearing?

To replace a rear wheel bearing of a VT Commodore, remove the hub from the car and press it in and out. The bearing has an inner and outer seal. The inner seal has a magnet for the abs sensor. Make sure to install the new bearing before the abs will pick up a speed fault.


How do you replace wheelbearing and seal in rear axle?

To replace the wheel bearing and seal in a rear axle, first, lift the vehicle and remove the rear wheel. Then, disconnect the brake components and remove the axle shaft from the housing. Next, press out the old bearing and seal using a bearing puller or specialized tools, clean the housing, and install the new seal followed by the new bearing. Finally, reassemble the axle components, ensuring everything is properly torqued and lubricated before reinstalling the wheel.


How do you replace rear wheel bearing 1997 Town Country?

Remove the tire and wheel. Remove the axle end. Remove the axle seal. Remove the wheel bearing. Reverse the process to install the new wheel bearing.


How do I remove a rear wheel bearing on a VQ Statesman?

Begin by removing the rear tire and wheel. Remove the end of the axle. Remove the wheel bearing nut. Remove the wheel bearing seal and the wheel bearing.


How do you replace a wheel hub assembly bearing seal on a 1993 dodge shadow?

Front is easy, just replace hub rear is pressed in